Below is a list of standard Arbor Hole Type Cutters offered by Hannibal Carbide Tool. If you do not see the Arbor Hole Type Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Arbor Hole Type Cutters. For technical assistance with your Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.

Type 559

Modified width between .0600" and .5312"

Width Grind Cutter Notes (All cutters on page)
  • 12 Teeth
  • C-2(m) Carbide
  • 5° Positive Radial Rake
  • Width Tolerance: +.001"/-.00"
  • OD tolerance: +.0313"/-.000"
  • 1" Arbor hold +.001"/-.000"
  • ANSI Standard keyway dimensions
  • Add 5% to grind down hub width
  • Add 5% to match OD's on cutter sets within .001"
  • Not designed to be used on heat treated materials greater than 363 Brinell (39Rc)
TOOL
DIAM
HUB
WIDTH
EDP NO. FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE
PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
3  .0555 55998D 0.0600 – 0.0703 $296.55 $275.10 $271.40 $269.45 $268.30 $241.20
3  .0711 55900D 0.0704 – 0.0859 325.55 304.10 300.40 298.45 297.20 270.20
3  .0868 55902D 0.0860 – 0.1015 296.55 275.10 271.40 269.45 268.30 241.20
3  .1024 55904D 0.1016 – 0.1171 285.55 264.20 260.45 258.50 257.30 230.25
3  .1180 55906D 0.1172 – 0.1406 275.25 253.80 250.05 248.10 246.95 219.90
3  .1562 55908D 0.1407 – 0.1718 280.55 259.20 255.45 253.50 252.35 225.20
3  .1875 55909D 0.1719 – 0.2031 285.95 264.50 260.75 258.85 257.70 230.60
3  .2188 55910D 0.2032 – 0.2343 293.20 271.90 268.15 266.15 265.00 237.90
3  .2500 55911D 0.2344 – 0.2812 300.50 279.10 275.30 273.35 272.20 245.05
3  .3125 55912D 0.2813 – 0.3437 323.85 302.45 298.70 296.80 295.65 268.45
3  .3750 55913D 0.3438 – 0.4062 349.00 327.60 323.85 321.85 320.70 293.65
3  .4375 55914D 0.4063 – 0.4687 374.40 353.00 349.25 347.30 346.15 319.10
3  .5000 55915D 0.4688 – 0.5312 399.85 378.40 374.65 372.75 371.60 344.40

Corner Radius or Chamfer on ONE Side

TOOL
DIAM
HUB
WIDTH
EDP NO. ONE RADIUS OR CHAMFER FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE
PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
3  .0555 55998R1 0.0600 – 0.0703 $311.00 $279.35 $275.10 $273.00 $271.70 $271.05
3  .0711 55900R1 0.0704 – 0.0859 340.05 308.35 304.10 301.95 300.65 300.00
3  .0868 55902R1 0.0860 – 0.1015 311.00 279.35 275.10 273.00 271.70 271.05
3  .1024 55904R1 0.1016 – 0.1171 300.10 268.40 264.20 262.05 260.70 260.00
3  .1180 55906R1 0.1172 – 0.1406 289.70 258.00 253.80 251.65 250.35 249.65
3  .1562 55908R1 0.1407 – 0.1718 295.05 263.40 259.20 257.00 255.70 255.00
3  .1875 55909R1 0.1719 – 0.2031 300.45 268.70 264.50 262.40 261.15 260.40
3  .2188 55910R1 0.2032 – 0.2343 307.70 276.10 271.90 269.65 268.40 267.65
3  .2500 55911R1 0.2344 – 0.2812 314.95 283.25 279.10 276.90 275.60 274.90
3  .3125 55912R1 0.2813 – 0.3437 338.35 306.70 302.45 300.30 299.05 298.25
3  .3750 55913R1 0.3438 – 0.4062 363.55 331.80 327.60 325.40 324.15 323.45
3  .4375 55914R1 0.4063 – 0.4687 388.90 357.20 353.00 350.85 349.60 348.85
3  .5000 55915R1 0.4688 – 0.5312 414.30 382.60 378.40 376.30 374.90 374.25
Specify right or left side for radius or chamfer
Radius Notes
  • Maximum radius on one side is .2656"
  • Full radius and maximum radius on both sides is 1/2 the width of the cutter
  • A non-tangent radii must be quoted
Chamfer Notes
  • Chamfer Angles can range from 0° to 45°
  • Chamfer is measured off the OD
  • Maximum chamfer is the LESSER of 1/3 the width of the cutter OR .2656" length of angle when measured across the OD
  • Chamfer Angle Tolerance: +/- 1/2°
  • Chamfers greater than 45°
Corner Radius or Chamfer on One Side

Corner Radius or Chamfer on BOTH Sides OR a Full Radius

Corner Radius or Chamfer on Both Sides.jpg
  • Price Increases 5% for Alternating Chamfers
TOOL
DIAM
HUB
WIDTH
EDP NO. RADII, CHAMFERS, OR COMBO FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE
PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
3  .0555 55998R2 0.0600 – 0.0703 $318.75 $283.60 $279.00 $276.50 $275.05 $274.30
3  .0711 55900R2 0.0704 – 0.0859 347.80 312.60 307.95 305.50 304.00 303.20
3  .0868 55902R2 0.0860 – 0.1015 318.75 283.60 279.00 276.50 275.05 274.30
3  .1024 55904R2 0.1016 – 0.1171 307.90 272.65 268.00 265.60 264.10 263.35
3  .1180 55906R2 0.1172 – 0.1406 297.50 262.30 257.60 255.20 253.70 252.95
3  .1562 55908R2 0.1407 – 0.1718 302.85 267.60 262.95 260.55 259.10 258.30
3  .1875 55909R2 0.1719 – 0.2031 308.15 273.00 268.35 265.90 264.45 263.70
3  .2188 55910R2 0.2032 – 0.2343 315.55 280.30 275.65 273.25 271.75 271.05
3  .2500 55911R2 0.2344 – 0.2812 322.70 287.45 282.85 280.40 279.00 278.20
3  .3125 55912R2 0.2813 – 0.3437 346.10 310.90 306.20 303.85 302.40 301.60
3  .3750 55913R2 0.3438 – 0.4062 371.30 336.05 331.40 329.00 327.50 326.75
3  .4375 55914R2 0.4063 – 0.4687 396.60 361.50 356.85 354.35 352.95 352.15
3  .5000 55915R2 0.4688 – 0.5312 422.05 386.95 382.20 379.80 378.35 377.55