Below is a list of standard Arbor Hole Type Cutters offered by Hannibal Carbide Tool. If you do not see the Arbor Hole Type Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Arbor Hole Type Cutters. For technical assistance with your Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.

Type 559

Modified width between .0704" and .5312"

Width Grind Cutter Notes (All cutters on page)
  • 16 Teeth
  • C-2(m) Carbide
  • 5° Positive Radial Rake
  • Width Tolerance: +.001"/-.00"
  • OD tolerance: +.0313"/-.000"
  • 1" Arbor hold +.001"/-.000"
  • ANSI Standard keyway dimensions
  • Add 5% to grind down hub width
  • Add 5% to match OD's on cutter sets within .001"
  • Not designed to be used on heat treated materials greater than 363 Brinell (39Rc)
TOOL
DIAM
HUB
WIDTH
EDP NO. FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE
PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
5  .0691 55942D 0.0704 – 0.0859 $428.30 $404.50 $400.15 $397.95 $396.65 $365.35
5  .0848 55944D 0.0860 – 0.1015 376.30 352.55 348.25 346.05 344.70 313.35
5  .1004 55946D 0.1016 – 0.1171 407.55 383.80 379.45 377.25 375.90 344.65
5  .1160 55948D 0.1094 – 0.1406 367.25 343.40 339.15 336.90 335.60 304.30
5  .1562 55950D 0.1407 – 0.1718 377.30 353.55 349.30 347.00 345.65 314.35
5  .1875 55952D 0.1719 – 0.2031 394.40 370.65 366.35 364.15 362.80 331.45
5  .2188 55954D 0.2032 – 0.2343 411.45 387.65 383.35 381.15 379.75 348.50
5  .2500 55956D 0.2344 – 0.2812 428.35 404.55 400.30 398.05 396.75 365.40
5  .3125 55958D 0.2813 – 0.3437 457.20 433.45 429.15 426.90 425.55 394.30
5  .3750 55960D 0.3438 – 0.4062 487.85 464.05 459.80 457.55 456.20 424.95
5  .4375 55962D 0.4063 – 0.4687 511.80 488.05 483.80 481.55 480.20 448.90
5  .5000 55964D 0.4688 – 0.5312 535.80 512.05 507.75 505.50 504.15 472.85

Corner Radius or Chamfer on ONE Side

TOOL
DIAM
HUB
WIDTH
EDP NO. ONE RADIUS OR CHAMFER FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE
PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
5  .0691 55942R1 0.0704 – 0.0859 $443.20 $408.85 $404.10 $401.55 $400.05 $399.30
5  .0848 55944R1 0.0860 – 0.1015 391.30 356.95 352.10 349.65 348.15 347.30
5  .1004 55946R1 0.1016 – 0.1171 422.50 388.20 383.35 380.90 379.35 378.60
5  .1160 55948R1 0.1094 – 0.1406 382.15 347.80 343.05 340.50 339.05 338.25
5  .1562 55950R1 0.1407 – 0.1718 392.30 357.90 353.10 350.65 349.10 348.35
5  .1875 55952R1 0.1719 – 0.2031 409.35 375.00 370.20 367.70 366.25 365.40
5  .2188 55954R1 0.2032 – 0.2343 426.35 392.00 387.20 384.75 383.20 382.40
5  .2500 55956R1 0.2344 – 0.2812 443.30 409.00 404.15 401.70 400.15 399.35
5  .3125 55958R1 0.2813 – 0.3437 472.15 437.80 433.00 430.50 429.05 428.25
5  .3750 55960R1 0.3438 – 0.4062 502.80 468.45 463.65 461.15 459.70 458.90
5  .4375 55962R1 0.4063 – 0.4687 526.80 492.45 487.60 485.15 483.65 482.85
5  .5000 55964R1 0.4688 – 0.5312 550.70 516.40 511.60 509.15 507.55 506.80
Specify right or left side for radius or chamfer
Radius Notes
  • Maximum radius on one side is .2656"
  • Full radius and maximum radius on both sides is 1/2 the width of the cutter
  • A non-tangent radii must be quoted
Chamfer Notes
  • Chamfer Angles can range from 0° to 45°
  • Chamfer is measured off the OD
  • Maximum chamfer is the LESSER of 1/3 the width of the cutter OR .2656" length of angle when measured across the OD
  • Chamfer Angle Tolerance: +/- 1/2°
  • Chamfers greater than 45°
Corner Radius or Chamfer on One Side

Corner Radius or Chamfer on BOTH Sides OR a Full Radius

Corner Radius or Chamfer on Both Sides.jpg
  • Price Increases 5% for Alternating Chamfers
TOOL
DIAM
HUB
WIDTH
EDP NO. RADII, CHAMFERS, OR COMBO FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE
PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
5  .0691 55942R2 0.0704 – 0.0859 $458.80 $417.60 $411.80 $408.80 $407.05 $406.10
5  .0848 55944R2 0.0860 – 0.1015 406.90 365.60 359.85 356.90 355.10 354.15
5  .1004 55946R2 0.1016 – 0.1171 438.05 396.85 391.10 388.10 386.35 385.35
5  .1160 55948R2 0.1094 – 0.1406 397.75 356.50 350.75 347.75 346.00 345.05
5  .1562 55950R2 0.1407 – 0.1718 407.85 366.60 360.85 357.90 356.10 355.10
5  .1875 55952R2 0.1719 – 0.2031 424.95 383.70 377.90 374.95 373.15 372.20
5  .2188 55954R2 0.2032 – 0.2343 441.90 400.75 394.95 392.00 390.20 389.25
5  .2500 55956R2 0.2344 – 0.2812 458.90 417.65 411.85 408.90 407.15 406.20
5  .3125 55958R2 0.2813 – 0.3437 487.70 446.50 440.75 437.75 435.95 435.00
5  .3750 55960R2 0.3438 – 0.4062 518.40 477.10 471.40 468.40 466.60 465.70
5  .4375 55962R2 0.4063 – 0.4687 542.40 501.10 495.35 492.40 490.60 489.65
5  .5000 55964R2 0.4688 – 0.5312 566.30 525.10 519.35 516.40 514.55 513.60