Decimal

Below is a list of standard Arbor Hole Type Cutters offered by Hannibal Carbide Tool. If you do not see the Arbor Hole Type Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Arbor Hole Type Cutters. For technical assistance with your Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.

Type 556 For Steel

Modified width between .0600" and .5312"
Width Grind Cutter Notes (All cutters on page)
  • 20 Teeth
  • C-5 Carbide
  • 1° - 3° Positive Radial Rake
  • Width Tolerance: +.001"/-.00"
  • OD tolerance: +.0313"/-.000"
  • 1" Arbor hold +.001"/-.000"
  • ANSI Standard keyway dimensions
  • Add 5% to grind down hub width
  • Add 5% to match OD's on cutter sets within .001"
  • Not designed to be used on heat treated materials greater than 475 Brinell (50Rc)
TOOL
DIAM 		HUB
WIDTH 		EDP NO. FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE 		PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
4  .0545 55616D 0.0600 – 0.0703 $480.35 $449.15 $443.30 $440.25 $438.45 $396.00
4  .0701 55618D 0.0704 – 0.0859 517.50 486.40 480.55 477.50 475.75 433.30
4  .0858 55620D 0.0860 – 0.1015 480.35 449.15 443.30 440.25 438.45 396.00
4  .1014 55622D 0.1016 – 0.1171 458.85 427.70 421.85 418.80 416.95 374.50
4  .1170 55624D 0.1172 – 0.1406 434.05 402.90 397.05 394.05 392.25 349.75
4  .1562 55626D 0.1407 – 0.1718 460.15 429.00 423.20 420.10 418.35 375.90
4  .1875 55628D 0.1719 – 0.2031 461.65 430.55 424.65 421.65 419.75 377.30
4  .2188 55630D 0.2032 – 0.2343 483.90 452.85 446.95 443.90 442.15 399.70
4  .2500 55632D 0.2344 – 0.2812 489.20 458.05 452.15 449.15 447.40 404.85
4  .3125 55634D 0.2813 – 0.3437 523.55 492.50 486.60 483.60 481.80 439.30
4  .3750 55636D 0.3438 – 0.4062 555.40 524.30 518.50 515.45 513.50 471.10
4  .4375 55638D 0.4063 – 0.4687 607.70 576.55 570.80 567.65 565.85 523.40
4  .5000 55640D 0.4688 – 0.5312 665.85 634.80 628.90 625.90 624.10 581.70

Corner Radius or Chamfer on ONE Side

TOOL
DIAM 		HUB
WIDTH 		EDP NO. ONE RADIUS OR CHAMFER FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE 		PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
4  .0545 55616R1 0.0600 – 0.0703 $499.75 $455.10 $448.75 $445.30 $443.25 $442.15
4  .0701 55618R1 0.0704 – 0.0859 537.10 492.50 486.00 482.50 480.55 479.40
4  .0858 55620R1 0.0860 – 0.1015 499.75 455.10 448.75 445.30 443.25 442.15
4  .1014 55622R1 0.1016 – 0.1171 478.20 433.65 427.25 423.85 421.80 420.70
4  .1170 55624R1 0.1172 – 0.1406 453.55 409.00 402.50 399.10 397.00 396.00
4  .1562 55626R1 0.1407 – 0.1718 479.70 435.10 428.65 425.20 423.20 422.05
4  .1875 55628R1 0.1719 – 0.2031 481.10 436.55 430.10 426.60 424.60 423.50
4  .2188 55630R1 0.2032 – 0.2343 503.50 458.90 452.40 448.95 446.95 445.90
4  .2500 55632R1 0.2344 – 0.2812 508.65 463.95 457.60 454.25 452.10 451.05
4  .3125 55634R1 0.2813 – 0.3437 543.00 498.60 491.95 488.60 486.60 485.45
4  .3750 55636R1 0.3438 – 0.4062 574.90 530.30 523.70 520.35 518.35 517.20
4  .4375 55638R1 0.4063 – 0.4687 627.20 582.60 576.20 572.80 570.65 569.65
4  .5000 55640R1 0.4688 – 0.5312 685.35 640.85 634.30 630.90 628.85 627.75
Specify right or left side for radius or chamfer 		Radius Notes
  • Maximum radius on one side is .2656"
  • Full radius and maximum radius on both sides is 1/2 the width of the cutter
  • A non-tangent radii must be quoted
Chamfer Notes
  • Chamfer Angles can range from 0° to 45°
  • Chamfer is measured off the OD
  • Maximum chamfer is the LESSER of 1/3 the width of the cutter OR .2656" length of angle when measured across the OD
  • Chamfer Angle Tolerance: +/- 1/2°
  • Chamfers greater than 45°
Corner Radius or Chamfer on One Side

Corner Radius or Chamfer on BOTH Sides OR a Full Radius

Corner Radius or Chamfer on Both Sides.jpg

Price Increases 5% for Alternating Chamfers

TOOL
DIAM 		HUB
WIDTH 		EDP NO. RADII, CHAMFERS, OR COMBO FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE 		PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
4  .0545 55616R2 0.0600 – 0.0703 $510.35 $461.20 $454.10 $450.35 $448.05 $446.85
4  .0701 55618R2 0.0704 – 0.0859 547.60 498.60 491.45 487.55 485.35 484.10
4  .0858 55620R2 0.0860 – 0.1015 510.35 461.20 454.10 450.35 448.05 446.85
4  .1014 55622R2 0.1016 – 0.1171 488.85 439.80 432.55 428.85 426.55 425.35
4  .1170 55624R2 0.1172 – 0.1406 464.25 415.05 407.90 404.10 401.85 400.70
4  .1562 55626R2 0.1407 – 0.1718 490.30 441.15 434.00 430.20 427.95 426.75
4  .1875 55628R2 0.1719 – 0.2031 491.80 442.55 435.35 431.80 429.45 428.20
4  .2188 55630R2 0.2032 – 0.2343 514.15 464.90 457.85 454.00 451.75 450.50
4  .2500 55632R2 0.2344 – 0.2812 519.20 470.10 463.00 459.20 456.90 455.75
4  .3125 55634R2 0.2813 – 0.3437 553.75 504.60 497.40 493.60 491.50 490.10
4  .3750 55636R2 0.3438 – 0.4062 585.45 536.35 529.15 525.40 523.20 522.00
4  .4375 55638R2 0.4063 – 0.4687 637.85 588.65 581.40 577.75 575.55 574.30
4  .5000 55640R2 0.4688 – 0.5312 696.00 646.80 639.70 635.95 633.75 632.50
The specifications of the Arbor Hole Type Cutters listed above are only the dimensions that are critical to the application. Please choose the Cutters that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Arbor Hole Type Cutters needs.