Decimal

Below is a list of standard Arbor Hole Type Cutters offered by Hannibal Carbide Tool. If you do not see the Arbor Hole Type Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Arbor Hole Type Cutters. For technical assistance with your Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.

Type 556 For Steel

Modified width between .0704" and .5312"

Width Grind Cutter Notes (All cutters on page)
  • 28 Teeth
  • C-5 Carbide
  • 1° - 3° Positive Radial Rake
  • Width Tolerance: +.001"/-.00"
  • OD tolerance: +.0313"/-.000"
  • 1" Arbor hold +.001"/-.000"
  • ANSI Standard keyway dimensions
  • Add 5% to grind down hub width
  • Add 5% to match OD's on cutter sets within .001"
  • Not designed to be used on heat treated materials greater than 475 Brinell (50Rc)
TOOL
DIAM
HUB
WIDTH
EDP NO. FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE
PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
6  .0681 55666D 0.0704 – 0.0859 $547.90 $520.60 $515.30 $512.50 $510.90 $472.30
6  .0838 55668D 0.0860 – 0.1015 508.30 481.00 475.70 472.90 471.30 432.70
6  .0994 55670D 0.1016 – 0.1171 549.55 522.20 516.90 514.15 512.45 473.95
6  .1150 55672D 0.1094 – 0.1406 529.65 502.30 497.05 494.20 492.60 454.00
6  .1562 55674D 0.1407 – 0.1718 529.40 502.00 496.70 493.95 492.30 453.80
6  .1875 55676D 0.1719 – 0.2031 562.45 535.15 529.85 527.10 525.40 486.80
6  .2188 55678D 0.2032 – 0.2343 570.80 543.45 538.20 535.40 533.75 495.20
6  .2500 55680D 0.2344 – 0.2812 605.00 577.60 572.30 569.55 567.90 529.30
6  .3125 55682D 0.2813 – 0.3437 612.30 584.95 579.65 576.85 575.25 536.70
6  .3750 55684D 0.3438 – 0.4062 632.95 605.50 600.20 597.45 595.85 557.30
6  .4375 55690D 0.4063 – 0.4687 694.85 667.50 662.20 659.35 657.80 619.15
6  .5000 55692D 0.4688 – 0.5312 763.60 736.35 731.05 728.20 726.60 688.00

Corner Radius or Chamfer on ONE Side

TOOL
DIAM
HUB
WIDTH
EDP NO. ONE RADIUS OR CHAMFER FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE
PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
6  .0681 55666R1 0.0704 – 0.0859 $564.25 $525.75 $519.90 $516.80 $515.00 $514.00
6  .0838 55668R1 0.0860 – 0.1015 524.60 486.15 480.30 477.20 475.35 474.35
6  .0994 55670R1 0.1016 – 0.1171 565.85 527.35 521.50 518.45 516.60 515.60
6  .1150 55672R1 0.1094 – 0.1406 545.90 507.50 501.60 498.50 496.65 495.65
6  .1562 55674R1 0.1407 – 0.1718 545.70 507.20 501.35 498.30 496.45 495.45
6  .1875 55676R1 0.1719 – 0.2031 578.75 540.30 534.40 531.30 529.50 528.50
6  .2188 55678R1 0.2032 – 0.2343 587.15 548.65 542.75 539.70 537.85 536.85
6  .2500 55680R1 0.2344 – 0.2812 621.25 582.80 576.85 573.85 572.05 571.00
6  .3125 55682R1 0.2813 – 0.3437 628.65 590.10 584.25 581.20 579.40 578.40
6  .3750 55684R1 0.3438 – 0.4062 649.20 610.70 604.85 601.80 599.95 598.95
6  .4375 55690R1 0.4063 – 0.4687 711.15 672.60 666.75 663.65 661.90 660.90
6  .5000 55692R1 0.4688 – 0.5312 779.95 741.45 735.60 732.50 730.65 729.70
Specify right or left side for radius or chamfer
Radius Notes
  • Maximum radius on one side is .2656"
  • Full radius and maximum radius on both sides is 1/2 the width of the cutter
  • A non-tangent radii must be quoted
Chamfer Notes
  • Chamfer Angles can range from 0° to 45°
  • Chamfer is measured off the OD
  • Maximum chamfer is the LESSER of 1/3 the width of the cutter OR .2656" length of angle when measured across the OD
  • Chamfer Angle Tolerance: +/- 1/2°
  • Chamfers greater than 45°
Corner Radius or Chamfer on One Side

Corner Radius or Chamfer on BOTH Sides OR a Full Radius

Corner Radius or Chamfer on Both Sides.jpg

Price Increases 5% for Alternating Chamfers

TOOL
DIAM
HUB
WIDTH
EDP NO. RADII, CHAMFERS, OR COMBO FINISHED TO MODIFIED FACE WIDTH
MODIFIED
FACE WIDTH
RANGE
PRICE EACH - BASED ON QUANTITY ORDERED
1 2 3 4 5 6
6  .0681 55666R2 0.0704 – 0.0859 $581.95 $536.05 $529.00 $525.40 $523.20 $522.05
6  .0838 55668R2 0.0860 – 0.1015 542.30 496.40 489.40 485.75 483.55 482.40
6  .0994 55670R2 0.1016 – 0.1171 583.55 537.65 530.65 526.95 524.85 523.60
6  .1150 55672R2 0.1094 – 0.1406 563.60 517.70 510.70 507.05 504.95 503.70
6  .1562 55674R2 0.1407 – 0.1718 563.40 517.50 510.50 506.80 504.65 503.45
6  .1875 55676R2 0.1719 – 0.2031 596.45 550.55 543.50 539.85 537.75 536.50
6  .2188 55678R2 0.2032 – 0.2343 604.80 558.90 551.90 548.25 546.10 544.90
6  .2500 55680R2 0.2344 – 0.2812 638.90 593.00 586.05 582.35 580.20 579.00
6  .3125 55682R2 0.2813 – 0.3437 646.35 600.40 593.40 589.75 587.60 586.40
6  .3750 55684R2 0.3438 – 0.4062 666.90 621.00 614.00 610.30 608.20 606.95
6  .4375 55690R2 0.4063 – 0.4687 728.80 682.90 675.90 672.25 670.10 668.90
6  .5000 55692R2 0.4688 – 0.5312 797.65 751.70 744.70 741.05 738.95 737.70
3  .0555 55698R2 0.0600 – 0.0703 334.25 300.00 295.15 292.65 291.20 290.40