Fractional


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  718 
 40  NON-FERROUS - SHORT CHIPS  718 
 60  CAST IRONS  718 
 80  LOW STRENGTH STEELS  719 
 100  MEDIUM STRENGTH STEELS  719 
 120  HIGH STRENGTH STEELS  719 
 140  HIGH TEMPERATURE ALLOYS  718

Type 719 Fractional - Radius Cutter - For Steels
Carbide Tipped
  • Right hand cut; Convex Radius
  • Straight shank with Weldon flats
  • Tool geometry & carbide grade appropriate for material being machined
  • Tool diameter tolerance: plus .005", minus .000"
  • Tool radius tolerance
    thru 1/8" radius: plus .001", minus .001"
    over 1/8" radius: plus .002", minus .002"
  Modifications: (Prompt delivery)
  • Reduced neck diameter
  • Shortened shank or reduced shank diameter
  • Additional shank drive flat(s)
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Below is a list of standard Shank Type Cutters offered by Hannibal Carbide Tool. If you do not see the Shank Type Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Shank Type Cutters. For technical assistance with your Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Radius Tool Diameter Dimensions Type 719
EDP NO.
Fractional
Price
Tool Width Shank Diameter Overall Length No. of Teeth
   1/32    3/    1/16    1/         6 71901 $182.75
   1/16    3/    1/    1/         6 71902 182.75
   3/32    7/    3/16    1/         6 71903 199.65
   1/  1/    1/    3/  1/ 6 71904 217.40
   5/32  5/16    5/16    3/  1/ 6 71905 250.15
   3/16  3/    3/    3/  1/ 6 71906 264.70
   1/  1/    1/    3/         6 71908 274.05