Fractional | Metric


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  650 
 40  NON-FERROUS - SHORT CHIPS  650 
 60  CAST IRONS  650 
 80  LOW STRENGTH STEELS  CALL US 
 100  MEDIUM STRENGTH STEELS  650 
 120  HIGH STRENGTH STEELS  650 
 140  HIGH TEMPERATURE ALLOYS  CALL US

Type 650 Fractional - 125ยบ Four Facet Point
Carbide Tipped
  • Long length
  • Flat relieved, self centering point
  • Polished straight flutes
  • Two coolant outlets
  • Drill body diameter smaller than tool diameter to prevent gauling; shank diameter same size as tool diameter
  • Shank and tool diameter tolerances: plus .000", minus .001"
  • Carbide high temperature brazed to hardened tool steel body
  • Extra long carbide tip for additional regrinds
  • Straight flutes for superior hole straightness, improved finish and maximum chip capacity
  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Modified metric tool diameter
  • Modified point and / or angle
  • Flat(s) on shank
  • Tanged shank
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • For drilling most materials, including some stainless steels
  • For deep holes, 7-15 tool diameters deep

Notes
  Contact us for modified tool diameter prices
Below is a list of standard Coolant Fed Drills offered by Hannibal Carbide Tool. If you do not see the Coolant Fed Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Coolant Fed Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Length Type 650
EDP NO.
Fractional
Price
Modified Tool Diameter Range
Frac. Dec. Flute Overall Low High
   1/  .2500  5/  1/ 65016 $139.75  .2490  .2530
  17/64  .2656  3/  1/ 65017 139.75
   9/32  .2813  3/  1/ 65018 139.75  .2640  .2840
  19/64  .2969  7/  3/ 65019 139.75
   5/16  .3125  7/  3/ 65020 139.75  .2950  .3160
  21/64  .3281          1/ 65021 134.55
  11/32  .3438          1/ 65022 134.55  .3260  .3460
  23/64  .3594  1/  3/ 65023 131.10
   3/  .3750  1/  3/ 65024 136.15  .3540  .3770
  25/64  .3906  1/         65025 134.55
  13/32  .4063  1/         65026 134.55  .3850  .4080
  27/64  .4219  3/  1/ 65027 138.85
   7/16  .4375  3/  1/ 65028 138.85  .4100  .4390
  29/64  .4531  3/  1/ 65029 147.65
  15/32  .4688  3/  1/ 65030 147.65  .4391  .4724
  31/64  .4844  3/  3/ 65031 152.05
   1/  .5000  3/  3/ 65032 152.05  .4725  .5030
  33/64  .5156                 65033 163.10
  17/32  .5313                 65034 163.10  .5031  .5330
  35/64  .5469  1/  1/ 65035 168.95
   9/16  .5625  1/  1/ 65036 171.85  .5331  .5650
  37/64  .5781  3/  3/ 65037 203.45
  19/32  .5938  3/  3/ 65038 206.90  .5651  .5950
  39/64  .6094  3/  3/ 65039 203.45
   5/  .6250  3/  3/ 65040 206.90  .5951  .6270
  41/64  .6406                 65041 214.40
  21/32  .6563                 65042 218.10  .6271  .6570
  43/64  .6719  1/  1/ 65043 229.55
  11/16  .6875  1/  1/ 65044 233.60  .6571  .6900
  45/64  .7031  1/  1/ 65045 238.30
  23/32  .7188  1/  1/ 65046 242.30  .6901  .7220
  47/64  .7344  3/  3/ 65047 240.30
   3/  .7500  3/  3/ 65048 244.50  .7221  .7530
  49/64  .7656  7/  7/ 65049 259.95
  25/32  .7813  7/  7/ 65050 259.95  .7531  .7840
  13/16  .8125         10         65052 264.35  .7841  .8160
  27/32  .8438         10         65054 279.80  .8161  .8470
   7/  .8750         10         65056 286.40  .8471  .8780
  29/32  .9063         10         65058 317.30  .8781  .9090
  15/16  .9375  3/ 10  3/ 65060 330.45  .9091  .9390
  31/32  .9688         11         65062 333.65  .9391  .9700
        1.0000         11         65064 333.65  .9701 1.0030