Fractional | Metric


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  652 
 40  NON-FERROUS - SHORT CHIPS  652 
 60  CAST IRONS  652 
 80  LOW STRENGTH STEELS  CALL US 
 100  MEDIUM STRENGTH STEELS  652 
 120  HIGH STRENGTH STEELS  652 
 140  HIGH TEMPERATURE ALLOYS  CALL US

Type 652 Fractional - 125ยบ Four Facet Point
Carbide Tipped
  • Short length
  • Flat relieved, self centering point
  • Polished straight flutes
  • Two coolant outlets
  • Drill body diameter smaller than tool diameter to prevent gauling; shank diameter same size as tool diameter
  • Shank and tool diameter tolerances: plus .000", minus .001"
  • Carbide high temperature brazed to hardened tool steel body
  • Extra long carbide tip for additional regrinds
  • Straight flutes for superior hole straightness, improved finish and maximum chip capacity
  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Modified metric tool diameter
  • Modified point and / or angle
  • Flat(s) on shank
  • Tanged shank
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • For drilling most materials, including some stainless steels
  • For intermediate depth holes, 5-8 tool diameters deep

Notes
  Contact us for modified tool diameter prices
Below is a list of standard Coolant Fed Drills offered by Hannibal Carbide Tool. If you do not see the Coolant Fed Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Coolant Fed Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Length Type 652
EDP NO.
Fractional
Price
Modified Tool Diameter Range
Frac. Dec. Flute Overall Low High
   1/  .2500  1/ 29/32 65216 $127.65  .2490  .2530
  17/64  .2656  3/  5/32 65217 127.65
   9/32  .2813  3/  5/32 65218 127.65  .2640  .2840
  19/64  .2969  3/16 19/32 65219 127.65
   5/16  .3125  3/16 19/32 65220 127.65  .2950  .3160
  21/64  .3281  7/16 27/32 65221 127.65
  11/32  .3438  7/16 27/32 65222 127.65  .3260  .3460
  23/64  .3594  5/  1/32 65223 128.95
   3/  .3750  5/  1/32 65224 128.95  .3540  .3770
  25/64  .3906  7/  9/32 65225 132.20
  13/32  .4063  7/  9/32 65226 132.20  .3850  .4080
  27/64  .4219  1/16 15/32 65227 136.65
   7/16  .4375  1/16 15/32 65228 136.65  .4100  .4390
  29/64  .4531  5/16 23/32 65229 145.50
  15/32  .4688  5/16 23/32 65230 145.50  .4391  .4724
  31/64  .4844  1/ 29/32 65231 149.75
   1/  .5000  1/ 29/32 65232 149.75  .4725  .5030
  33/64  .5156 13/16  7/32 65233 156.05
  17/32  .5313 13/16  7/32 65234 158.70  .5031  .5330
  35/64  .5469 13/16  7/32 65235 164.60
   9/16  .5625 13/16  7/32 65236 167.50  .5331  .5650
  37/64  .5781  3/16 19/32 65237 197.30
  19/32  .5938  3/16 19/32 65238 200.60  .5651  .5950
  39/64  .6094  3/16 19/32 65239 197.30
   5/  .6250  3/16 19/32 65240 200.60  .5951  .6270
  41/64  .6406  3/16 19/32 65241 211.50
  21/32  .6563  3/16 19/32 65242 211.50  .6271  .6570
  43/64  .6719  5/  1/32 65243 228.85
  11/16  .6875  5/  1/32 65244 229.15  .6571  .6900
  45/64  .7031  5/  1/32 65245 235.65
  23/32  .7188  5/  1/32 65246 235.65  .6901  .7220
  47/64  .7344  1/16 15/32 65247 238.00
   3/  .7500  1/16 15/32 65248 238.00  .7221  .7530
  49/64  .7656  1/16  9/16 65249 249.15
  25/32  .7813  1/16  9/16 65250 253.45  .7531  .7840
  13/16  .8125  1/16  9/16 65252 257.70  .7841  .8160
  27/32  .8438  1/         65254 273.25  .8161  .8470
   7/  .8750  1/         65256 279.80  .8471  .8780
  29/32  .9063 15/16  7/16 65258 299.45  .8781  .9090
  15/16  .9375 15/16  7/16 65260 321.65  .9091  .9390
  31/32  .9688 15/16  7/16 65262 334.85  .9391  .9700
        1.0000  3/  7/ 65264 343.65  .9701 1.0030