Fractional | Metric

DISCONTINUED - WHILE SUPPLIES LAST


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  652 
 40  NON-FERROUS - SHORT CHIPS  652 
 60  CAST IRONS  652 
 80  LOW STRENGTH STEELS  CALL US 
 100  MEDIUM STRENGTH STEELS  652 
 120  HIGH STRENGTH STEELS  652 
 140  HIGH TEMPERATURE ALLOYS  CALL US

Type 652 Metric - 125ยบ Four Facet Point
Carbide Tipped
  • Short length
  • Flat relieved, self centering point
  • Polished straight flutes
  • Two coolant outlets
  • Drill body diameter smaller than tool diameter to prevent gauling; shank diameter same size as tool diameter
  • Shank and tool diameter tolerances: plus .000", minus .001"
  • Carbide high temperature brazed to hardened tool steel body
  • Extra long carbide tip for additional regrinds
  • Straight flutes for superior hole straightness, improved finish and maximum chip capacity
  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Modified metric tool diameter
  • Modified point and / or angle
  • Flat(s) on shank
  • Tanged shank
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • For drilling most materials, including some stainless steels
  • For intermediate depth holes, 5-8 tool diameters deep

Notes
  EDP No. 652065 has 6.35mm shank diameter
  Contact us for modified tool diameter prices
Below is a list of standard Coolant Fed Drills offered by Hannibal Carbide Tool. If you do not see the Coolant Fed Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Coolant Fed Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Length Type 652
EDP NO.
Metric
Price
Modified Tool Diameter Range
Flute Overall
mm Inch mm Inch mm Inch Low High
6.5  .2559 64.0  1/ 125.0 29/32 652065 $244.60
7.0  .2756 70.0  3/ 131.0  5/32 652070 244.60 6.7060 7.2140
7.5  .2953 81.0  3/16 142.0 19/32 652075 244.60 7.4930 8.0260
8.0  .3150 81.0  3/16 142.0 19/32 652080 244.60
8.5  .3346 87.0  7/16 148.0 27/32 652085 236.20 8.2800 8.7880
9.0  .3543 92.0  5/ 153.0  1/32 652090 236.20 8.9920 9.5760
9.5  .3740 92.0  5/ 153.0  1/32 652095 236.20
10.0  .3937 98.0  7/ 159.0  9/32 652100 236.20 9.7790 10.3630
10.5  .4134 103.0  1/16 164.0 15/32 652105 244.60 10.4140 11.1510
11.0  .4331 103.0  1/16 164.0 15/32 652110 244.60
11.5  .4528 109.0  5/16 171.0 23/32 652115 264.40 11.1530 12.0000
12.0  .4724 109.0  5/16 171.0 23/32 652120 264.40
12.5  .4921 114.0  1/ 175.0 29/32 652125 270.00 12.0020 12.7760
13.0  .5118 122.0 13/16 183.0  7/32 652130 286.80 12.7790 13.5380
13.5  .5315 122.0 13/16 183.0  7/32 652135 286.80
14.0  .5512 122.0 13/16 183.0  7/32 652140 300.90 13.5410 14.3510
14.5  .5709 131.0  3/16 193.0 19/32 652145 365.55 14.3540 15.1130
15.0  .5906 131.0  3/16 193.0 19/32 652150 365.55
15.5  .6102 131.0  3/16 193.0 19/32 652155 365.55 15.1160 15.9260
16.0  .6299 131.0  3/16 193.0 19/32 652160 373.90 15.9280 16.6880
16.5  .6496 131.0  3/16 193.0 19/32 652165 373.90
17.0  .6693 143.0  5/ 204.0  1/32 652170 399.20 16.6900 17.5260
17.5  .6890 143.0  5/ 204.0  1/32 652175 399.20
18.0  .7087 143.0  5/ 204.0  1/32 652180 419.05 17.5290 18.3390
18.5  .7283 154.0  1/16 215.0 15/32 652185 421.75 18.3410 19.1260
19.0  .7480 154.0  1/16 215.0 15/32 652190 421.75
19.5  .7677 154.0  1/16 217.0  9/16 652195 447.15 19.1290 19.9140
20.0  .7874 154.0  1/16 217.0  9/16 652200 452.85 19.9160 20.7260
20.5  .8071 154.0  1/16 217.0  9/16 652205 452.85
21.0  .8268 165.0  1/ 229.0         652210 478.00 20.7290 21.5140
21.5  .8465 165.0  1/ 229.0         652215 478.00
22.0  .8661 165.0  1/ 229.0         652220 489.30 21.5160 22.3010
22.5  .8858 176.0 15/16 240.0  7/16 652225 539.90 22.3040 23.0890
23.0  .9055 176.0 15/16 240.0  7/16 652230 539.90
23.5  .9252 176.0 15/16 240.0  7/16 652235 559.60 23.0910 23.8510
24.0  .9449 176.0 15/16 240.0  7/16 652240 582.00 23.8530 24.6380
24.5  .9646 176.0 15/16 240.0  7/16 652245 577.15
25.0  .9843 187.0  3/ 251.0  7/ 652250 582.00 24.6410 25.4760