Reduced Shank Fractional


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 60  CAST IRONS  673 / 672 
 80  LOW STRENGTH STEELS  672 / 673 
 100  MEDIUM STRENGTH STEELS (UP TO 50 Rc)  672 / 673 
 100  MEDIUM STRENGTH STEELS (OVER 50 Rc)  670 / 671 
 120  HIGH STRENGTH STEELS (UP TO 50 Rc)  673 / 672 
 120  HIGH STRENGTH STEELS (OVER 50 Rc)  671 / 670 
 140  HIGH TEMPERATURE ALLOYS  673 / 672

Type 670 Reduced Shank Fractional - 118ยบ Point With Negative Edge
Carbide Tipped
  • Die drill - negative angle cutting edge
  • Drill body diameter smaller than tool diameter to prevent gauling
  • Carbide tip high temperature brazed to hardened tool steel body
  • Smooth flutes for effective chip flow
  • Precision ground to insure concentricity of tip & body
  • All dimensional & element tolerances conform to one of:
    ASME/ANSI B94.11M
    ISO - International Organization for Standardization
    NAS 907 - National Aerospace Standards
    USCTI - United States Cutting Tool Institute (formerly MCTI)
  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Metric tool diameter
  • Modified point and / or angle
  • Flat(s) on shank
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • Can be used in drill chucks with diameter limitations
  • For drilling hardened steel in the range of 35 to 65 Rockwell C
  • Will cut without annealing the workpiece
  • Light feed with steady pressure - clear chips frequently
  • Flood the cutting point with coolant
Below is a list of standard Reduced Shank Diameter Drills offered by Hannibal Carbide Tool. If you do not see the Reduced Shank Diameter Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Reduced Shank Diameter Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Dimensions Type 670
EDP NO.
Reduced Shank Fractional
Price
Frac. Dec. Shank Diameter Overall Length
   5/16  .3125    1/  1/ 670620 $43.90
  11/32  .3438    1/  3/ 670622 46.75
   3/  .3750    1/         670624 50.25
  13/32  .4063    1/  1/ 670626 58.90
   7/16  .4375    1/  1/ 670628 68.25
  15/32  .4688    1/  3/ 670630 74.95
   1/  .5000    1/         670632 87.95
   7/16  .4375    3/  1/ 670728 68.25
  15/32  .4688    3/  3/ 670730 74.95
   1/  .5000    3/         670732 87.95
  17/32  .5313    3/         670734 100.90
   9/16  .5625    3/         670736 104.35
  19/32  .5938    3/         670738 110.40
   5/  .6250    3/         670740 113.80
  21/32  .6563    3/  1/ 670742 121.75
  11/16  .6875    3/  1/ 670744 125.05
  23/32  .7188    3/         670746 131.00
   3/  .7500    3/         670748 134.55
   9/16  .5625    1/         670836 104.35
  19/32  .5938    1/         670838 110.40
   5/  .6250    1/         670840 113.80
  21/32  .6563    1/  1/ 670842 121.75
  11/16  .6875    1/  1/ 670844 125.05
  23/32  .7188    1/         670846 131.00
   3/  .7500    1/         670848 134.55
  13/16  .8125    1/         670852 241.25
   7/  .8750    1/         670856 246.30
  15/16  .9375    1/         670860 274.45
        1.0000    1/         670864 291.15
  13/16  .8125    3/         670952 241.25
   7/  .8750    3/         670956 246.30
  15/16  .9375    3/         670960 274.45
        1.0000    3/         670964 291.15