Fractional | Metric

DISCONTINUED - WHILE SUPPLIES LAST


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  630 
 40  NON-FERROUS - SHORT CHIPS  630 / 631 
 60  CAST IRONS  631 / 630 
 80  LOW STRENGTH STEELS  CALL US 
 100  MEDIUM STRENGTH STEELS  CALL US 
 120  HIGH STRENGTH STEELS  CALL US 
 140  HIGH TEMPERATURE ALLOYS  CALL US

Type 631 Fractional - 135º Split Point
Carbide Tipped
  • 135º split point designed for drilling tough abrasive or high tensile materials
  • Longer flute and overall lengths than jobbers length drills
  • Carbide tip high temperature brazed to hardened tool steel body
  • Smooth flutes for effective chip flow
  • Precision ground to insure concentricity of tip & body
  • All dimensional & element tolerances conform to one of:
    ASME/ANSI B94.11M
    ISO - International Organization for Standardization
    NAS 907 - National Aerospace Standards
    USCTI - United States Cutting Tool Institute (formerly MCTI)
  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Modified metric tool diameter
  • Modified point and / or angle
  • Reduced shank diameter
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • The longer length of these drills increases their effective reach through drill bushings
  • For use in ASA split sleeve drill drivers
Below is a list of standard Taper Length Drills offered by Hannibal Carbide Tool. If you do not see the Taper Length Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Taper Length Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Length Type 631
EDP NO.
Fractional
Price
Frac. Wire / Letter Dec. Flute Overall
   1/  .1250  3/  1/ 63108 $26.60
30  .1285          3/ 63330 32.30
29  .1360          3/ 63329 32.30
28  .1405          3/ 63328 32.30
   9/64  .1406          3/ 63109 28.15
27  .1440          3/ 63327 32.30
26  .1470          3/ 63326 32.30
25  .1495          3/ 63325 32.30
24  .1520          3/ 63324 32.30
23  .1540          3/ 63323 32.30
   5/32  .1563          3/ 63110 28.15
22  .1570  3/  3/ 63322 33.50
21  .1590  3/  3/ 63321 33.50
20  .1610  3/  3/ 63320 33.50
19  .1660  3/  3/ 63319 33.50
18  .1695  3/  3/ 63318 33.50
  11/64  .1719  3/  3/ 63111 29.15
17  .1730  3/  3/ 63317 33.50
16  .1770  3/  3/ 63316 33.50
15  .1800  3/  3/ 63315 33.50
14  .1820  3/  3/ 63314 33.50
13  .1850  3/  3/ 63313 33.50
   3/16  .1875  3/  3/ 63112 29.15
12  .1890  5/         63312 35.30
11  .1910  5/         63311 35.30
10  .1935  5/         63310 35.30
9  .1960  5/         63309 35.30
8  .1990  5/         63308 35.30
7  .2010  5/         63307 35.30
  13/64  .2031  5/         63113 30.75
6  .2040  5/         63306 35.30
5  .2055  5/         63305 35.30
4  .2090  5/         63304 35.30
3  .2130  5/         63303 35.30
   7/32  .2188  5/         63114 30.75
2  .2210  3/  1/ 63302 40.05
1  .2280  3/  1/ 63301 40.05
A  .2340  3/  1/ 63501 40.05
  15/64  .2344  3/  1/ 63115 34.70
B  .2380  3/  1/ 63502 40.05
C  .2420  3/  1/ 63503 40.05
D  .2460  3/  1/ 63504 40.05
   1/ E  .2500  3/  1/ 63116 34.70
F  .2570  7/  1/ 63506 44.75
G  .2610  7/  1/ 63507 44.75
  17/64  .2656  7/  1/ 63117 38.90
H  .2660  7/  1/ 63508 44.75
I  .2720  7/  1/ 63509 44.75
J  .2770  7/  1/ 63510 44.75
K  .2810  7/  1/ 63511 44.75
   9/32  .2813  7/  1/ 63118 38.90
L  .2900          3/ 63512 48.35
M  .2950          3/ 63513 48.35
  19/64  .2969          3/ 63119 42.05
N  .3020          3/ 63514 48.35
   5/16  .3125          3/ 63120 42.05
O  .3160  1/  1/ 63515 54.95
P  .3230  1/  1/ 63516 54.95
  21/64  .3281  1/  1/ 63121 47.90
Q  .3320  1/  1/ 63517 54.95
R  .3390  1/  1/ 63518 54.95
  11/32  .3438  1/  1/ 63122 48.35
S  .3480  1/  3/ 63519 60.20
T  .3580  1/  3/ 63520 60.20
  23/64  .3594  1/  3/ 63123 52.40
U  .3680  1/  3/ 63521 60.20
   3/  .3750  1/  3/ 63124 52.40
V  .3770  3/         63522 64.50
W  .3860  3/         63523 64.50
  25/64  .3906  3/         63125 56.10
X  .3970  3/         63524 64.50
Y  .4040  3/         63525 64.50
  13/32  .4063  3/         63126 56.10
Z  .4130  5/  1/ 63526 74.20
  27/64  .4219  5/  1/ 63127 64.50
   7/16  .4375  5/  1/ 63128 64.50
  29/64  .4531  3/  1/ 63129 72.60
  15/32  .4688  3/  1/ 63130 72.60
  31/64  .4844  3/  3/ 63131 74.95
   1/  .5000  3/  3/ 63132 74.95
  33/64  .5156  3/         63133 107.50
  17/32  .5313  3/         63134 107.50
  35/64  .5469  7/  1/ 63135 108.45
   9/16  .5625  7/  1/ 63136 108.45
  37/64  .5781  7/  3/ 63137 119.90
  19/32  .5938  7/  3/ 63138 116.40
  39/64  .6094  7/  3/ 63139 137.60
   5/  .6250  7/  3/ 63140 131.80
  41/64  .6406  1/         63141 152.30
  21/32  .6563  1/         63142 134.10
  43/64  .6719  3/  1/ 63143 174.65
  11/16  .6875  3/  1/ 63144 136.65
  45/64  .7031  5/  1/ 63145 153.05
  23/32  .7188  5/  1/ 63146 154.55
  47/64  .7344  7/  3/ 63147 155.40
   3/  .7500  7/  3/ 63148 157.80
  49/64  .7656          7/ 63149 161.10
  25/32  .7813          7/ 63150 164.40
  51/64  .7969  1/ 10         63151 167.70
  13/16  .8125  1/ 10         63152 171.00
  53/64  .8281  1/ 10         63153 174.30
  27/32  .8438  1/ 10         63154 177.60
  55/64  .8594  1/ 10         63155 180.90
   7/  .8750  1/ 10         63156 184.25
  57/64  .8906  1/ 10         63157 187.55
  29/32  .9063  1/ 10         63158 190.85
  59/64  .9219  1/ 10  3/ 63159 194.15
  15/16  .9375  1/ 10  3/ 63160 197.40
  61/64  .9531  3/ 11         63161 200.75
  31/32  .9688  3/ 11         63162 204.05
  63/64  .9844  3/ 11         63163 207.35
        1.0000  3/ 11         63164 210.65