Fractional


Type 314 Fractional - Three Straight Flutes
Carbide Tipped
  • Three straight flutes provide generous capacity for chips
  • Center cutting design for plunge, slot, profile, and peripheral milling including splines, keyways, and spotfacing
  • Radial edged for longer tool life
  • Geometry and carbide grade, O.D. relief and end clearance appropriate for material being machined
  • Flute long carbide tips brazed to tough hardened alloy steel body
  • Straight shanks have standard Weldon drive flats
  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Metric tool diameter
  • Cutting diameter reduced for step or pilot
  • Corner chamfer or corner radius
  • Shortened shank or reduced shank diameter
  • Additional shank drive flat(s)
  • Stocked coated tools priced below
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 

Notes
  When ordering stocked coated tools, specify TiN, TiCN or TiAIN after EDP No.
Tool Diameter Dimensions Type 314
EDP NO.
Price
Shank Diameter No. of Flutes Length
Frac. Dec. Carbide Overall
   3/  .3750    3/ 3    1/  1/ 31412 $118.20
   7/16  .4375    3/ 3    3/  1/ 31414 120.85
   1/  .5000    1/ 3    3/         31416 124.05
   9/16  .5625    1/ 3    3/         31418 128.80
   5/  .6250    5/ 3    3/  1/ 31420 150.75
   3/  .7500    5/ 3    3/  3/ 31424 157.75
   7/  .8750    7/ 3    3/  3/ 31428 184.15
        1.0000    7/ 3    3/  3/ 31432 202.30
 1/ 1.1250         3    3/         31436 216.70
 1/ 1.2500         3    3/         31440 251.05
 1/ 1.5000  1/ 3    3/         31448 298.50