Fractional


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  780 
 40  NON-FERROUS - SHORT CHIPS  780 
 60  CAST IRONS  780 
 80  LOW STRENGTH STEELS  781 
 100  MEDIUM STRENGTH STEELS  781 
 120  HIGH STRENGTH STEELS  781 
 140  HIGH TEMPERATURE ALLOYS  780

S.A.E. Ports - MS16142 J514F J1926
Type 780 Fractional - For Non-Ferrous & Cast Irons
Carbide Tipped
  • 5ยบ axial rake
  • Negative radial rake
  • Full form relieved cutting edges without O.D. lands provide true form and size for the tool life
  • Can be resharpened with a simple face grind
  • Heat treated bodies
  • All tolerances within military specs
  Modifications: (Prompt delivery)
  • Reamer diameter
  • Spotface diameter
  • Reamer length
  • Shank style
  • Port ID groove
  • Weldon flats
  • Whistle notch
  • Tang
  • Shank Length
  • Metric tool diameter
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • In a single operation, a port contour cutter can produce the form and finish required on internal straight thread o-ring ports
Below is a list of standard S.A.E Ports MS16142 - J514f - J1926 Port Contour Cutters offered by Hannibal Carbide Tool. If you do not see the S.A.E Ports MS16142 - J514f - J1926 Port Contour Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your S.A.E Ports MS16142 - J514f - J1926 Port Contour Cutters. For technical assistance with your Port Contour Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tube Dimensions Type 780
EDP NO.
Fractional
Price
Thread Size Diameter Sealing Seat Angle Length
No. Size Reamer Spotface Shank Shank Reamer Head Overall
2    1/    5/16 – 24  .2720  .6820  .5000 12°          .4730  1/  1/ 78002 $265.45
3    3/16    3/ – 24  .3350  .7600  .5000 12°          .4730  1/  1/ 78003 265.45
4    1/    7/16 – 20  .3890  .8380  .5000 12°          .5520  1/  1/ 78004 265.45
5    5/16    1/ – 20  .4520  .9160  .5000 12°          .5520  1/  1/ 78005 273.80
6    3/    9/16 – 18  .5090  .9790  .5000 12°          .6140  1/  1/ 78006 273.80
8    1/    3/ – 16  .6890 1.1980  .7500 15°          .6930  3/  3/ 78008 299.65
10    5/    7/ – 14  .8060 1.3540  .7500 15°          .7860  5/  5/ 78010 338.90
12    3/  1/16 – 12  .9810 1.6350  .7500 15°  1/  .9110  7/  1/ 78012 365.60
14    7/  3/16 – 12 1.1060 1.7750  .7500 15°  1/  .9110  7/  1/ 78014 371.50
16          5/16 – 12 1.2310 1.9200  .7500 15°  1/  .9110  7/  1/ 78016 399.85
20  1/  5/ – 12 1.5440 2.2800 1.0000 15°  1/  .9110          1/ 78020 440.50
24  1/  7/ – 12 1.7940 2.5700 1.0000 15°  1/  .9110          1/ 78024 541.75
32          1/ – 12 2.4190 3.4900 1.0000 15°  1/  .9110  1/  1/ 78032 707.50