Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  414 
 40  NON-FERROUS - SHORT CHIPS  414 / 424 
 60  CAST IRONS  424 
 80  LOW STRENGTH STEELS  434 / 424 
 100  MEDIUM STRENGTH STEELS  434 
 120  HIGH STRENGTH STEELS  434 
 140  HIGH TEMPERATURE ALLOYS  434

Type 414 Metric - For Non-Ferrous Materials
Carbide Tipped
  • Center coolant outlet
  • Polished flutes; flute long carbide on .2841" tool diameter and larger
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • Material specific reamer shanks are ground to next smallest shank diameter listed in NAS 897 if tool diameter is within .005" of shank diameter
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Metric tool diameter
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • Center coolant outlet for reaming blind holes as chips are flushed back towards the shank
  • Improves hole finish and permits higher feeds & speeds with longer tool life

Notes
  EDP No. 414045 - 414070 4.5 mm - 7.0 mm: 1/2" carbide length
Below is a list of standard Coolant Fed Reamers offered by Hannibal Carbide Tool. If you do not see the Coolant Fed Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Coolant Fed Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 414
EDP NO.		 Metric
Price		 Dimensions Finished To Modified Tool Diameter
Max. Shank Diam. No. of Flutes Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute & Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
4.5  .1772 414045 $156.10  .1704 4 1  1/4  5         4.4940 4.6960 $189.40 $167.35 $159.90 $156.40 $152.60 $149.55 $145.25
5.0  .1969 414050 156.10  .1805 4 1  1/4  5         4.6970 5.1820 189.40 167.35 159.90 156.40 152.60 149.55 145.25
5.5  .2165 414055 156.10  .2075 4 1  1/4  5         5.1830 5.6130 189.40 167.35 159.90 156.40 152.60 149.55 145.25
6.0  .2362 414060 156.10  .2265 4 1  1/2  6         5.6140 6.0450 189.40 167.35 159.90 156.40 152.60 149.55 145.25
—  .2480 414063  .2405 4 1  1/2  6         6.0460 6.4260 189.40 167.35 159.90 156.40 152.60 149.55 145.25
6.5  .2559 414065 164.80  .2485 4 1  1/2  6         6.4270 7.2140 198.05 176.00 168.60 164.95 161.25 158.15 154.00
7.0  .2756 414070 164.80  .2485 4 1  1/2  6         — — — — — — — — —
7.5  .2953 414075 173.25  .2792 4 1  1/2  6         7.2150 8.0010 206.50 184.40 177.10 173.45 169.55 166.70 162.30
8.0  .3150 414080 173.25  .2792 4 1  1/2  6         — — — — — — — — —
8.5  .3346 414085 174.55  .2792 4 1  1/2  6         8.0020 8.8140 207.75 185.75 178.20 174.70 170.90 167.90 163.60
9.0  .3543 414090 176.15  .3105 4 1  3/4  7         8.8150 9.6010 209.35 187.35 179.85 176.25 172.55 169.45 165.35
9.5  .3740 414095 176.15  .3105 4 1  3/4  7         — — — — — — — — —
10.0  .3937 414100 176.70  .3105 4 1  3/4  7         9.6020 10.3890 209.90 187.90 180.45 176.85 173.10 170.05 165.85
10.5  .4134 414105 178.20  .3730 6 1  3/4  7         10.3900 11.2010 211.50 189.45 182.10 178.50 174.80 171.70 167.40
11.0  .4331 414110 178.20  .3730 6 1  3/4  7         — — — — — — — — —
11.5  .4528 414115 179.70  .3730 6 1  3/4  7         11.2020 11.9890 213.05 190.90 183.55 179.85 176.20 173.10 169.00
12.0  .4724 414120 181.70  .4355 6 2         8         11.9900 12.7760 214.80 192.95 185.40 181.80 178.10 174.95 170.75
12.5  .4921 414125 181.70  .4355 6 2         8         — — — — — — — — —
13.0  .5118 414130 185.35  .4355 6 2         8         12.7770 13.5640 218.65 196.55 189.15 185.45 181.80 178.70 174.55
13.5  .5315 414135 185.35  .4355 6 2         8         — — — — — — — — —
14.0  .5512 414140 187.75  .4355 6 2         8         13.5650 14.3760 221.10 198.95 191.65 188.05 184.30 181.15 176.90
14.5  .5709 414145 191.45  .4355 6 2         8         14.3770 15.1640 224.65 202.55 195.15 191.65 187.90 184.85 180.50
15.0  .5906 414150 149.85  .4355 6 2         8         — — — — — — — — —
15.5  .6102 414155 194.80  .5615 6 2  1/4  9         15.1650 15.9510 228.00 206.00 198.55 194.90 191.10 188.15 183.80
16.0  .6299 414160 213.95  .5615 6 2  1/4  9         15.9520 16.7390 247.25 225.20 217.80 214.20 210.55 207.40 203.10
16.5  .6496 414165 167.50  .5615 6 2  1/4  9         — — — — — — — — —
17.0  .6693 414170 218.00  .5615 6 2  1/4  9         16.7400 17.5510 251.35 229.25 221.95 218.25 214.60 211.45 207.25
17.5  .6890 414175 170.70  .5615 6 2  1/4  9         — — — — — — — — —
18.0  .7087 414180 226.90  .5615 6 2  1/4  9         17.5520 18.3390 260.10 238.15 230.60 227.00 223.35 220.20 216.00
18.5  .7283 414185 226.90  .6245 6 2  1/2  9  1/2  18.3400 19.1260 260.10 238.15 230.60 227.00 223.35 220.20 216.00
19.0  .7480 414190 177.65  .6245 6 2  1/2  9  1/2  — — — — — — — — —
19.5  .7677 414195 233.15  .6245 6 2  1/2  9  1/2  19.1270 19.9140 266.35 244.35 236.95 233.30 229.65 226.50 222.20
20.0  .7874 414200 233.15  .6245 6 2  1/2  9  1/2  19.9150 20.7260 266.35 244.35 236.95 233.30 229.65 226.50 222.20
20.5  .8071 414205 182.55  .6245 6 2  1/2  9  1/2  — — — — — — — — —
21.0  .8268 414210 240.50  .6245 6 2  1/2  9  1/2  20.7270 21.5140 273.90 251.80 244.45 240.80 237.05 234.00 229.75
21.5  .8465 414215 188.35  .6245 6 2  1/2  9  1/2  — — — — — — — — —
22.0  .8661 414220 240.50  .7495 6 2  5/8  10         21.5150 22.3010 273.90 251.80 244.45 240.80 237.05 234.00 229.75
22.5  .8858 414225 275.50  .7495 6 2  5/8  10         22.3020 23.0890 310.05 287.15 279.50 275.70 271.95 268.75 264.30
23.0  .9055 414230 215.70  .7495 6 2  5/8  10         — — — — — — — — —
23.5  .9252 414235 275.50  .7495 8 2  5/8  10         23.0900 23.9010 310.05 287.15 279.50 275.70 271.95 268.75 264.30
24.0  .9449 414240 276.70  .7495 8 2  5/8  10         23.9020 24.6890 311.15 288.20 280.55 276.80 272.95 269.75 265.30
24.5  .9646 414245 216.60  .7495 8 2  5/8  10         — — — — — — — — —
25.0  .9843 414250 276.70  .8745 8 2  3/4  10  1/2  24.6900 25.4760 311.15 288.20 280.55 276.80 272.95 269.75 265.30
25.5 1.0039 414255 284.00  .8745 8 2  3/4  10  1/2  25.4770 27.0760 318.50 295.60 288.00 284.20 280.35 277.20 272.75
26.0 1.0236 414260 222.35  .8745 8 2  3/4  10  1/2  — — — — — — — — —
27.0 1.0630 414270 222.35  .8745 8 2  3/4  10  1/2  — — — — — — — — —
28.0 1.1024 414280 293.20  .8745 8 2  7/8  11         27.0770 28.6510 327.90 304.90 297.15 293.45 289.60 286.45 282.00
29.0 1.1417 414290 313.00  .9995 8 2  7/8  11         28.6520 30.2390 347.70 324.70 317.00 313.25 309.45 306.25 301.75
30.0 1.1811 414300 245.05  .9995 8 2  7/8  11         — — — — — — — — —
31.0 1.2205 414310 317.00  .9995 8 3         11  1/2  30.2400 31.8260 351.55 328.65 321.05 317.20 313.40 310.20 305.75
32.0 1.2598 414320 325.65  .9995 8 3         11  1/2  31.8270 33.4140 360.20 337.25 329.65 325.90 321.90 318.80 314.40
33.0 1.2992 414330 255.00  .9995 8 3         11  1/2  — — — — — — — — —
34.0 1.3386 414340 338.25  .9995 8 3  1/4  12         33.4150 35.0010 372.75 349.80 342.20 338.40 334.60 331.35 326.95
35.0 1.3780 414350 264.85  .9995 8 3  1/4  12         — — — — — — — — —
36.0 1.4173 414360 348.40  .9995 8 3  1/4  12         35.0020 36.5890 382.85 359.90 352.30 348.55 344.75 341.55 337.10
37.0 1.4567 414370 359.55 1.2495 8 3  1/2  12  1/2  36.5900 38.1760 394.05 371.15 363.45 359.75 355.85 352.75 348.20
38.0 1.4961 414380 281.50 1.2495 8 3  1/2  12  1/2  — — — — — — — — —
The specifications of the Coolant Fed Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Coolant Fed Reamers needs.