Extended Length


Type 416 Extended Length - For Non-Ferrous Materials
  • Coolant hold through the center
  • All Extended length reamers provided with controlled shank
  • Must specify overall length when ordering (centers supplied only at maximum overall length)
  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Below is a list of standard Extended Length - Coolant Fed Reamers offered by Hannibal Carbide Tool. If you do not see the Extended Length - Coolant Fed Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Extended Length - Coolant Fed Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Range Type 416
EDP NO.
Dimensions Finished To Modified Tool Diameter
Max. Shank Diam. No. of Flutes Length Price Each - Based on Quantity Ordered
Flute Overall Range 1 2 3 4 5-7 8-14**
*  .1751 –  .1910 41606EL  .1724 4  1/ 17/32 – 9 $280.10 $252.85 $243.70 $239.35 $234.70 $231.00
*  .1911 –  .2210 41607EL  .1880 4  1/  1/32 – 10 290.90 263.60 254.45 250.15 245.50 241.80
*  .2211 –  .2530 41608EL  .2193 4  1/  1/32 – 12 323.15 295.90 286.75 282.45 277.70 274.05
*  .2531 –  .2840 41609EL  .2505 4  1/  1/32 – 12 338.80 311.55 302.40 298.05 293.35 289.70
 .2841 –  .3150 41610EL  .2792 4  1/  1/32 – 12 250.55 223.30 214.15 209.80 205.10 201.45
 .3151 –  .3470 41611EL  .2792 4  1/  1/32 – 12 250.55 223.30 214.15 209.80 205.10 201.45
 .3471 –  .3780 41612EL  .3105 4  3/  1/32 – 14 255.45 228.20 219.10 214.80 210.10 206.45
 .3781 –  .4090 41613EL  .3105 4  3/  1/32 – 14 255.45 228.20 219.10 214.80 210.10 206.45
 .4091 –  .4410 41614EL  .3730 6  3/  1/32 – 14 256.55 229.25 220.15 215.85 211.15 207.50
 .4411 –  .4720 41615EL  .3730 6  3/  1/32 – 14 256.55 229.25 220.15 215.85 211.15 207.50
 .4721 –  .5030 41616EL  .4355 6          1/32 – 16 279.10 251.80 242.70 238.35 233.70 230.00
 .5031 –  .5340 41617EL  .4355 6          1/32 – 16 279.10 251.80 242.70 238.35 233.70 230.00
 .5341 –  .5660 41618EL  .4355 6          1/32 – 16 281.05 253.80 244.65 240.30 235.60 231.95
 .5661 –  .5970 41619EL  .4355 6          1/32 – 16 281.05 253.80 244.65 240.30 235.60 231.95
 .5971 –  .6280 41620EL  .5615 6  1/  1/32 – 18 286.60 259.35 250.20 245.85 241.20 237.50
 .6281 –  .6590 41621EL  .5615 6  1/  1/32 – 18 286.60 259.35 250.20 245.85 241.20 237.50
 .6591 –  .6910 41622EL  .5615 6  1/  1/32 – 18 289.70 262.45 253.30 248.95 244.30 240.60
 .6911 –  .7220 41623EL  .5615 6  1/  1/32 – 18 289.70 262.45 253.30 248.95 244.30 240.60
 .7221 –  .7530 41624EL  .6245 6  1/ 17/32 – 18 301.60 274.35 265.25 260.85 256.20 252.50
 .7531 –  .7840 41625EL  .6245 6  1/ 17/32 – 18 343.75 317.80 309.10 304.95 300.50 297.00
 .7841 –  .8160 41626EL  .6245 6  1/ 17/32 – 18 356.10 330.15 321.45 317.30 312.85 309.35
 .8161 –  .8470 41627EL  .6245 6  1/ 17/32 – 18 359.40 333.45 324.75 320.60 316.15 312.65
 .8471 –  .8780 41628EL  .7495 6  5/ 10  1/32 – 18 361.65 335.70 327.00 322.85 318.40 314.90
 .8781 –  .9090 41629EL  .7495 6  5/ 10  1/32 – 18 375.70 349.75 341.05 336.90 332.45 328.95
 .9091 –  .9410 41630EL  .7495 8  5/ 10  1/32 – 18 382.15 356.20 347.50 343.35 338.90 335.40
 .9411 –  .9720 41631EL  .7495 8  5/ 10  1/32 – 18 384.25 358.30 349.60 345.45 341.00 337.50
 .9721 – 1.0030 41632EL  .8745 8  3/ 10 17/32 – 18 395.30 369.35 360.65 356.50 352.05 348.55
* Solid Carbide
** Quantities of 15 or more — Contact Hannibal Specials Dept.