Semi-Finished


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  430 / 440 
 40  NON-FERROUS - SHORT CHIPS  430 / 440 
 60  CAST IRONS  430 / 440 
 80  LOW STRENGTH STEELS  440 / 430 
 100  MEDIUM STRENGTH STEELS  440 / 430 
 120  HIGH STRENGTH STEELS  440 / 430 
 140  HIGH TEMPERATURE ALLOYS  440 / 430

Type 430 Semi-Finished - Straight Flutes
Carbide Tipped
  • Polished flutes; flute long carbide on .2841" tool diameter and larger
  • Straight shank fits into standard holders
  • Pin cross hole permits use in pin drive floating holders
  • Left spiral flutes should not be used on blind holes
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
 

Notes
  Before semi-finished reamers can be used, the tool diameter must be finish ground & relieved and the reamer end must be faced & chamfered
  Semi-finished reamers are purchased by regrind shops, distributors, or users with regrind capabilities
Below is a list of standard Semi-finished Reamers offered by Hannibal Carbide Tool. If you do not see the Semi-finished Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Semi-finished Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Semi-Finished
Tool Diameter Range
Type 430
EDP NO.
Semi-Finished
Price
Low High
 .1770  .2040 43006SF $37.35
 .2041  .2210 43007SF 37.35
 .2211  .2380 4302344SF 37.35
 .2381  .2530 43008SF 37.35
 .2531  .2840 43009SF 37.35
 .2841  .3150 43010SF 43.40
 .3151  .3470 43011SF 43.85
 .3471  .3780 43012SF 47.50
 .3781  .4090 43013SF 48.10
 .4091  .4410 43014SF 57.10
 .4411  .4720 43015SF 57.10
 .4721  .5030 43016SF 62.40
 .5031  .5340 43017SF 62.40
 .5341  .5660 43018SF 65.85
 .5661  .5970 43019SF 65.85
 .5971  .6280 43020SF 67.60
 .6281  .6590 43021SF 67.60
 .6591  .6910 43022SF 70.70
 .6911  .7220 43023SF 70.70
 .7221  .7530 43024SF 72.50
 .7531  .7840 43025SF 72.50
 .7841  .8160 43026SF 78.75
 .8161  .8470 43027SF 78.75
 .8471  .8780 43028SF 86.05
 .8781  .9090 43029SF 86.05
 .9091  .9410 43030SF 94.75
 .9411  .9720 43031SF 94.75
 .9721 1.0030 43032SF 99.50
1.0031 1.0660 43034SF 99.50
1.0661 1.1280 43036SF 116.40
1.1281 1.1905 43038SF 121.35
1.1906 1.2530 43040SF 142.20
1.2531 1.3155 43042SF 142.20
1.3156 1.3780 43044SF 144.15
1.3781 1.4405 43046SF 168.10
1.4406 1.5030 43048SF 201.90