Step Reamers


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  457ST 
 40  NON-FERROUS - SHORT CHIPS  457ST / 458ST 
 60  CAST IRONS  459ST 
 80  LOW STRENGTH STEELS  458ST / 459ST 
 100  MEDIUM STRENGTH STEELS  459ST 
 120  HIGH STRENGTH STEELS  459ST 
 140  HIGH TEMPERATURE ALLOYS  459ST

Type 459 Step Reamers - For Steels & High Temp Alloys
Carbide Tipped
  • Type "C" with flute long carbide
  • Straight polished flutes and straight shank
  • Longer flutes than Type 450 on .5971" tool diameter and larger for straight deep holes
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • Material specific reamer shanks are ground to next smallest shank diameter listed in NAS 897 if tool diameter is within .005" of shank diameter
  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Metric tool diameter
  • Closer tool diameter tolerance
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 

Notes
  Ordering Instructions:
Specify dimensions according to the letters (A, B, C, D, G & H) indicated on line drawing. Also, indicate if pilot is cutting or non-cutting and describe material being machined.
  Recommended stock removal is 3% per cutting diameter. Maximum between major and minor diameter (cutting or non-cutting pilot) should not exceed 6%. Both major and minor cutting diameter must be within cuttting diameter range listed. Non-cutting pilot diameter can be smaller than cutting diameter range as indicated in the "non-cutting pilot minmum diameter" column.
Below is a list of standard Step Reamers offered by Hannibal Carbide Tool. If you do not see the Step Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Step Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Major & Minor Cutting Diameter Range Dimensions Type 459
EDP NO.
Finished to Modified Tool Diameter
Price Each - Based on Quantity Ordered
Diameter No. of Flutes Length
Low High Non-Cut Pilot Min. Max. Shank Flute & Carbide Overall 1 2 3 4 5-7 8-14 Over 14
 .4411  .4720  .4150  .3730 6  3/         45915ST $140.90 $110.40 $100.15 $95.30 $90.05 $85.95 $79.95
 .1770  .2040  .1660  .1805 4  1/  1/ 45906ST 122.55 92.00 81.75 76.90 71.65 67.55 61.60
1.2531 1.3155 1.1780  .9995 8         11  1/ 45942ST 237.60 205.05 194.20 189.00 183.45 179.00 172.65
 .8471  .8780  .7970  .7495 6  5/ 10         45928ST 176.50 142.55 131.20 125.80 119.95 115.40 108.75
 .5971  .6280  .5610  .5615 6  1/         45920ST 156.85 124.15 113.20 107.95 102.40 97.95 91.55
 .3151  .3470  .2960  .2792 4  1/         45911ST 126.15 95.60 85.35 80.55 75.30 71.20 65.20
1.0031 1.0660  .9430  .8745 8  3/ 10  1/ 45934ST 202.20 169.65 158.70 153.55 147.95 143.60 137.25
 .7221  .7530  .6790  .6245 6  1/  1/ 45924ST 162.70 130.00 119.05 113.85 108.25 103.85 97.45
 .4721  .5030  .4440  .4355 6                 45916ST 151.00 118.25 107.30 102.10 96.50 92.10 85.70
 .2041  .2210  .1920  .2075 4  1/         45907ST 122.55 92.00 81.75 76.90 71.65 67.55 61.60
1.3156 1.3780 1.2370  .9995 8  1/ 12         45944ST 249.10 216.55 205.70 200.50 194.90 190.50 184.15
 .8781  .9090  .8260  .7495 6  5/ 10         45929ST 194.45 160.50 149.10 143.75 137.90 133.35 126.70
 .6281  .6590  .5900  .5615 6  1/         45921ST 158.55 125.85 114.85 109.60 104.05 99.60 93.25
 .3471  .3780  .3260  .3105 4  3/         45912ST 126.15 95.60 85.35 80.55 75.30 71.20 65.20
1.0661 1.1280 1.0020  .8745 8  7/ 11         45936ST 213.55 181.00 170.15 165.00 159.40 155.00 148.65
 .7531  .7840  .7080  .6245 6  1/  1/ 45925ST 166.05 133.35 122.45 117.20 111.55 107.20 100.80
 .5031  .5340  .4730  .4355 6                 45917ST 153.45 120.75 109.80 104.60 98.95 94.55 88.15
1.3781 1.4405 1.2960  .9995 8  1/ 12         45946ST 264.30 231.70 220.80 215.60 210.05 205.70 199.30
 .2381  .2530  .2240  .2405 4  1/         45908ST 122.55 92.00 81.75 76.90 71.65 67.55 61.60
 .9091  .9410  .8550  .7495 8  5/ 10         45930ST 194.45 160.50 149.10 143.75 137.90 133.35 126.70
 .6591  .6910  .6200  .5615 6  1/         45922ST 158.55 125.85 114.85 109.60 104.05 99.60 93.25
 .3781  .4090  .3550  .3105 4  3/         45913ST 129.35 98.85 88.65 83.75 78.55 74.40 68.45
1.1281 1.1905 1.0610  .9995 8  7/ 11         45938ST 220.40 187.80 176.90 171.75 166.15 161.75 155.40
 .7841  .8160  .7370  .6245 6  1/  1/ 45926ST 166.05 133.35 122.45 117.20 111.55 107.20 100.80
 .5341  .5660  .5020  .4355 6                 45918ST 153.45 120.75 109.80 104.60 98.95 94.55 88.15
1.4406 1.5030 1.3550 1.2495 8  1/ 12  1/ 45948ST 270.15 237.60 226.75 221.55 216.00 211.60 205.20
 .2531  .2840  .2380  .2485 4  1/         45909ST 123.95 93.40 83.15 78.30 73.10 68.95 62.95
 .9411  .9720  .8850  .7495 8  5/ 10         45931ST 200.50 166.55 155.20 149.75 143.90 139.35 132.70
 .2211  .2380  .2080  .2265 4  1/         4592344ST 122.55 92.00 81.75 76.90 71.65 67.55 61.60
 .4091  .4410  .3850  .3730 6  3/         45914ST 135.05 104.50 94.25 89.35 84.15 80.00 74.10
1.1906 1.2530 1.1200  .9995 8         11  1/ 45940ST 232.95 200.45 189.50 184.35 178.80 174.40 168.05
 .8161  .8470  .7670  .6245 6  1/  1/ 45927ST 170.05 137.35 126.40 121.20 115.60 111.20 104.80
 .5661  .5970  .5320  .4355 6                 45919ST 156.85 124.15 113.20 107.95 102.40 97.95 91.55
 .2841  .3150  .2670  .2792 4  1/         45910ST 123.95 93.40 83.15 78.30 73.10 68.95 62.95
 .9721 1.0030  .9140  .8745 8  3/ 10  1/ 45932ST 200.50 166.55 155.20 149.75 143.90 139.35 132.70
 .6911  .7220  .6500  .5615 6  1/         45923ST 162.70 130.00 119.05 113.85 108.25 103.85 97.45