TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  540 
 40  NON-FERROUS - SHORT CHIPS  540 / 541 
 60  CAST IRONS  541 
 80  LOW STRENGTH STEELS  542 
 100  MEDIUM STRENGTH STEELS  542 
 120  HIGH STRENGTH STEELS  542 
 140  HIGH TEMPERATURE ALLOYS  543

Type 547 Fractional - General Purpose
Carbide Tipped
  • Tool diameter tolerance: plus 1/16", minus .000"
  • Face width tolerance: plus .001", minus .000"
  • Arbor hole tolerance: plus .001", minus .000"
  • Alternating right and left hand axial rake.
  • Carbide extends across the entire length of each tooth.
  • Tool geometry and carbide grade appropriate for machining most materials including steels, stainless steels, cast irons, composites, aluminums and titaniums.
  Modifications: (Prompt delivery)
  • Alternate chamfer every other tooth
  • Corner chamfer or corner radius on both sides
  • Reduced face width
  • Closer tool diameter tolerance
  • Chip breakers
  • Matched tool diameter set(s)
  • Reduced hub width
  • Additional keyway
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Below is a list of standard Arbor Hole Type Cutters offered by Hannibal Carbide Tool. If you do not see the Arbor Hole Type Cutters you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Arbor Hole Type Cutters. For technical assistance with your Cutters please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Face Width Dimensions Type 547
EDP NO.
Fractional
Price
Frac. Dec. Arbor Hole No. of Teeth
           3/16  .1875         8 54710 $510.70
           1/  .2500         8 54712 522.90
           5/16  .3125         8 54714 527.55
           3/  .3750         8 54716 529.65
           1/  .5000         8 54718 546.10
           5/  .6250         8 54720 584.65
           3/16  .1875         10 54722 554.90
           1/  .2500         10 54724 561.80
           5/16  .3125         10 54726 568.60
           3/  .3750         10 54728 575.45
           1/  .5000         10 54730 583.50
           5/  .6250         10 54732 594.40
           3/  .7500         10 54734 601.10
           1/  .2500  1/ 14 54750 721.35
           5/16  .3125  1/ 14 54752 726.80
           3/  .3750  1/ 14 54754 727.85
           1/  .5000  1/ 14 54756 737.35
           5/  .6250  1/ 14 54758 741.55
           3/  .7500  1/ 14 54760 765.70
                1.0000  1/ 14 54762 819.85