Fractional | Metric

DISCONTINUED - WHILE SUPPLIES LAST


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  650 
 40  NON-FERROUS - SHORT CHIPS  650 
 60  CAST IRONS  650 
 80  LOW STRENGTH STEELS  CALL US 
 100  MEDIUM STRENGTH STEELS  650 
 120  HIGH STRENGTH STEELS  650 
 140  HIGH TEMPERATURE ALLOYS  CALL US

Type 650 Metric - 125ยบ Four Facet Point
Carbide Tipped
  • Long length
  • Flat relieved, self centering point
  • Polished straight flutes
  • Two coolant outlets
  • Drill body diameter smaller than tool diameter to prevent gauling; shank diameter same size as tool diameter
  • Shank and tool diameter tolerances: plus .000", minus .001"
  • Carbide high temperature brazed to hardened tool steel body
  • Extra long carbide tip for additional regrinds
  • Straight flutes for superior hole straightness, improved finish and maximum chip capacity
  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Modified metric tool diameter
  • Modified point and / or angle
  • Flat(s) on shank
  • Tanged shank
  • Coatings available:
  •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • For drilling most materials, including some stainless steels
  • For deep holes, 7-15 tool diameters deep

Notes
  EDP No. 650065 has 6.35mm shank diameter
  Contact us for modified tool diameter prices
Below is a list of standard Coolant Fed Drills offered by Hannibal Carbide Tool. If you do not see the Coolant Fed Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Coolant Fed Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Length Type 650
EDP NO.
Metric
Price
Modified Tool Diameter Range
Flute Overall
mm Inch mm Inch mm Inch Low High
6.5  .2559 117.0  5/ 156.0  1/ 650065 $216.10
7.0  .2756 121.0  3/ 159.0  1/ 650070 216.10 6.7060 7.2140
7.5  .2953 124.0  7/ 162.0  3/ 650075 216.10 7.4930 8.0260
8.0  .3150 124.0  7/ 162.0  3/ 650080 216.10
8.5  .3346 127.0         165.0  1/ 650085 208.70 8.2800 8.7880
9.0  .3543 133.0  1/ 171.0  3/ 650090 208.70 8.9920 9.5760
9.5  .3740 133.0  1/ 171.0  3/ 650095 208.70
10.0  .3937 140.0  1/ 178.0         650100 208.70 9.7790 10.3630
10.5  .4134 146.0  3/ 184.0  1/ 650105 216.10 10.4140 11.1510
11.0  .4331 146.0  3/ 184.0  1/ 650110 216.10
11.5  .4528 146.0  3/ 191.0  1/ 650115 233.55 11.1530 12.0000
12.0  .4724 146.0  3/ 191.0  1/ 650120 233.55
12.5  .4921 146.0  3/ 197.0  3/ 650125 238.50 12.0020 12.7760
13.0  .5118 152.0         203.0         650130 253.35 12.7790 13.5380
13.5  .5315 152.0         203.0         650135 253.35
14.0  .5512 159.0  1/ 210.0  1/ 650140 265.80 13.5410 14.3510
14.5  .5709 171.0  3/ 222.0  3/ 650145 322.80 14.3540 15.1130
15.0  .5906 171.0  3/ 222.0  3/ 650150 322.80
15.5  .6102 171.0  3/ 222.0  3/ 650155 322.80 15.1160 15.9260
16.0  .6299 178.0         229.0         650160 330.35 15.9280 16.6880
16.5  .6496 178.0         229.0         650165 330.35
17.0  .6693 184.0  1/ 235.0  1/ 650170 352.60 16.6900 17.5260
17.5  .6890 184.0  1/ 235.0  1/ 650175 352.60
18.0  .7087 191.0  1/ 241.0  1/ 650180 370.10 17.5290 18.3390
18.5  .7283 197.0  3/ 248.0  3/ 650185 372.55 18.3410 19.1260
19.0  .7480 197.0  3/ 248.0  3/ 650190 372.55
19.5  .7677 200.0  7/ 251.0  7/ 650195 395.00 19.1290 19.9140
20.0  .7874 203.0         254.0 10         650200 400.05 19.9160 20.7260
20.5  .8071 203.0         254.0 10         650205 400.05
21.0  .8268 203.0         254.0 10         650210 422.30 20.7290 21.5140
21.5  .8465 203.0         254.0 10         650215 422.30
22.0  .8661 203.0         254.0 10         650220 432.20 21.5160 22.3010
22.5  .8858 203.0         254.0 10         650225 476.95 22.3040 23.0890
23.0  .9055 203.0         254.0 10         650230 476.95
23.5  .9252 222.0  3/ 273.0 10  3/ 650235 494.30 23.0910 23.8510
24.0  .9449 229.0         279.0 11         650240 514.20 23.8530 24.6380
24.5  .9646 229.0         279.0 11         650245 514.20
25.0  .9843 229.0         279.0 11         650250 514.20 24.6410 25.4760