Fractional

DISCONTINUED - WHILE SUPPLIES LAST


Type 680 Fractional - Carbide Spear Point - Straight Shank
Carbide Tipped
  • Carbide tip brazed to hardened tool steel body
  • Long carbide tip permits many regrinds
 		 
Use:
  • For drilling glass, tile porcelain, ceramic and other hard, fragile materials without chipping or cracking the material when properly used
  • Speed should be approx. 25 surface feet per minute (150 to 760 RPM based on tool diameter) using a steady, moderate hand feed
  • Constant flow of coolant important
  • Material being drilled should be backed with wood or rubber to support material during drill break-through
  • Avoid vibration and excessive stress
  • Keep drill sharp to eliminate excessive pressure
Below is a list of standard Glass & Tile Drills offered by Hannibal Carbide Tool. If you do not see the Glass & Tile Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Glass & Tile Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Dimensions Type 680
EDP NO.		 Fractional
Price
Frac. Dec. Shank Diameter Overall Length
   1/8   .1250    7/64 2  1/2  68008 $28.80
   3/16  .1875    5/32 2  1/2  68012 28.80
   1/4   .2500    7/32 2  1/2  68016 33.05
   5/16  .3125    1/4  3         68020 42.50
   3/8   .3750    5/16 3  1/2  68024 47.30
   7/16  .4375    3/8  3  1/2  68028 53.70
   1/2   .5000    7/16 3  1/2  68032 58.60
   9/16  .5625    1/2  4         68036 82.30
   5/8   .6250    9/16 4         68040 99.15
The specifications of the Glass & Tile Drills listed above are only the dimensions that are critical to the application. Please choose the Drills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Glass & Tile Drills needs.