Hannibal Carbide Tool Inc.

• PRODUCTS
• Spotlight
• Company Profile
• Advantages
• Request Info
• Tech Support
• Contact Us

• Reamers
  • h6 Shank Reamers
  • Coolant Fed
  • Extended Length
  • Extended Length - Coolant Fed
  • General Purpose
  • Material Specific
  • Pipe Tap
  • Semi-Finished
  • Shell Reamers & Arbors
  • Step
  • Solid Carbide
• Drills
  • Aircraft Extension
  • Cobalt
  • Coolant Fed
  • Core
  • Glass & Tile
  • Hard Steel Die
  • Jobbers Length
  • Masonry
  • Reduced Shank Diameter
  • Spotting/Centering (CNC)
  • Solid Carbide
  • Stub Length (CNC)
  • Taper Length
  • Taper Shank
• Counterbores
  • Aircraft
  • Capscrew
  • Pilots
  • Straight Shank
  • Taper Shank
  • Stub Length
• Milling Cutters
  • Arbor Hole Type
  • Shank Type
• End Mills
  • Center Cutting
  • High Spiral Shear Cutting
  • Slow Spiral
  • Straight Flutes
• Port Contour
  Cutters
  • ISO 6149-1 Metric Port w/o I.D. Groove
  • MS33649 Integral Reamer Pilot
  • S.A.E. - MS16142 - J514F - J1926
• Centers
  • Brown & Sharpe
  • Jarno
  • Morse
• Countersinks
  • Single Flute
  • Three Flute
• Single Points
  • Premium C2
  • Premium C5 - C6
  • S.A. Series Swiss Automatic Tool

Fractional | Metric

DISCONTINUED - WHILE SUPPLIES LAST

TOOL SELECTOR CHIP CLASS MATERIAL MACHINED TOOL TYPE  20   NON-FERROUS - LONG CHIPS   690   40   NON-FERROUS - SHORT CHIPS   690 / 691   60   CAST IRONS   691 / 690   80   LOW STRENGTH STEELS   CALL US   100   MEDIUM STRENGTH STEELS   CALL US   120   HIGH STRENGTH STEELS   CALL US   140   HIGH TEMPERATURE ALLOYS   CALL US
Type 690 Metric - 118º Standard Point Carbide Tipped Tanged jobbers length - 118º standard point Carbide tip high temperature brazed to hardened tool steel body Smooth flutes for effective chip flow Precision ground to insure concentricity of tip & body All dimensional & element tolerances conform to one of: ASME/ANSI B94.11M ISO - International Organization for Standardization NAS 907 - National Aerospace Standards USCTI - United States Cutting Tool Institute (formerly MCTI)		Modifications: (Prompt delivery) Modified tool diameter Modified metric tool diameter Modified point and / or angle Reduced shank diameter Coatings available:  TITANIUM NITRIDE - TiN   TITANIUM CARBONITRIDE - TiCN   ZIRCONIUM NITRIDE - ZrN   AL TITANIUM NITRIDE - AITiN
Use: For use in ASA split sleeve drill drivers

Below is a list of standard Jobbers Length Drills offered by Hannibal Carbide Tool. If you do not see the Jobbers Length Drills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Jobbers Length Drills. For technical assistance with your Drills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.

Tool Diameter		Length				Type 690 EDP NO.	Metric Price
		Flute		Overall
mm	Inch	mm	Inch	mm	Inch
3.2	.1260	41.0	1  5/8	70.0	2  3/4	690032	$27.15
3.3	.1299	44.0	1  3/4	73.0	2  7/8	690033	27.15
3.4	.1339	44.0	1  3/4	73.0	2  7/8	690034	27.15
3.5	.1378	44.0	1  3/4	73.0	2  7/8	690035	24.90
3.6	.1417	48.0	1  7/8	76.0	3	690036	25.95
3.7	.1457	48.0	1  7/8	76.0	3	690037	25.95
3.8	.1496	48.0	1  7/8	76.0	3	690038	25.95
3.9	.1535	51.0	2	79.0	3  1/8	690039	25.95
4.0	.1575	54.0	2  1/8	83.0	3  1/4	690040	24.50
4.1	.1614	54.0	2  1/8	83.0	3  1/4	690041	23.45
4.2	.1654	54.0	2  1/8	83.0	3  1/4	690042	24.90
4.3	.1693	54.0	2  1/8	83.0	3  1/4	690043	24.90
4.4	.1732	56.0	2  3/16	86.0	3  3/8	690044	24.90
4.5	.1772	56.0	2  3/16	86.0	3  3/8	690045	25.95
4.6	.1811	56.0	2  3/16	86.0	3  3/8	690046	28.25
4.7	.1850	59.0	2  5/16	89.0	3  1/2	69213	26.20
4.8	.1890	59.0	2  5/16	89.0	3  1/2	69212	27.20
4.9	.1929	62.0	2  7/16	92.0	3  5/8	690049	28.25
5.0	.1969	62.0	2  7/16	92.0	3  5/8	690050	27.10
5.1	.2008	62.0	2  7/16	92.0	3  5/8	690051	29.40
5.2	.2047	64.0	2  1/2	95.0	3  3/4	690052	29.40
5.3	.2087	64.0	2  1/2	95.0	3  3/4	690053	29.40
5.4	.2126	64.0	2  1/2	95.0	3  3/4	690054	29.40
5.5	.2165	64.0	2  1/2	95.0	3  3/4	690055	28.60
5.6	.2205	67.0	2  5/8	98.0	3  7/8	690056	30.15
5.7	.2244	67.0	2  5/8	98.0	3  7/8	690057	30.15
5.8	.2283	67.0	2  5/8	98.0	3  7/8	690058	30.15
5.9	.2323	67.0	2  5/8	98.0	3  7/8	690059	30.15
6.0	.2362	70.0	2  3/4	102.0	4	690060	29.80
6.1	.2402	70.0	2  3/4	102.0	4	690061	31.50
6.2	.2441	70.0	2  3/4	102.0	4	690062	31.50
6.3	.2480	70.0	2  3/4	102.0	4	690063	31.50
6.4	.2520	73.0	2  7/8	105.0	4  1/8	690064	31.50
6.5	.2559	73.0	2  7/8	105.0	4  1/8	690065	31.00
6.6	.2598	73.0	2  7/8	105.0	4  1/8	690066	33.00
6.7	.2638	73.0	2  7/8	105.0	4  1/8	690067	33.00
6.8	.2677	73.0	2  7/8	105.0	4  1/8	690068	33.00
6.9	.2717	73.0	2  7/8	105.0	4  1/8	690069	33.00
7.0	.2756	73.0	2  7/8	105.0	4  1/8	690070	32.30
7.1	.2795	75.0	2 15/16	108.0	4  1/4	690071	33.80
7.2	.2835	75.0	2 15/16	108.0	4  1/4	690072	33.80
7.3	.2874	75.0	2 15/16	108.0	4  1/4	690073	33.80
7.4	.2913	78.0	3  1/16	111.0	4  3/8	690074	33.80
7.5	.2953	78.0	3  1/16	111.0	4  3/8	690075	33.80
7.6	.2992	78.0	3  1/16	111.0	4  3/8	690076	35.55
7.7	.3031	81.0	3  3/16	114.0	4  1/2	690077	35.55
7.8	.3071	81.0	3  3/16	114.0	4  1/2	690078	35.55
7.9	.3110	81.0	3  3/16	114.0	4  1/2	690079	35.55
8.0	.3150	81.0	3  3/16	114.0	4  1/2	690080	34.65
8.1	.3189	84.0	3  5/16	117.0	4  5/8	690081	37.80
8.2	.3228	84.0	3  5/16	117.0	4  5/8	690082	37.80
8.3	.3268	84.0	3  5/16	117.0	4  5/8	690083	37.80
8.4	.3307	87.0	3  7/16	121.0	4  3/4	690084	37.80
8.5	.3346	87.0	3  7/16	121.0	4  3/4	690085	36.05
8.6	.3386	87.0	3  7/16	121.0	4  3/4	690086	37.80
8.7	.3425	87.0	3  7/16	121.0	4  3/4	690087	37.80
8.8	.3465	89.0	3  1/2	124.0	4  7/8	690088	37.80
8.9	.3504	89.0	3  1/2	124.0	4  7/8	690089	37.80
9.0	.3543	89.0	3  1/2	124.0	4  7/8	690090	36.95
9.1	.3583	89.0	3  1/2	124.0	4  7/8	690091	40.95
9.2	.3622	92.0	3  5/8	127.0	5	690092	40.95
9.3	.3661	92.0	3  5/8	127.0	5	690093	40.95
9.4	.3701	92.0	3  5/8	127.0	5	690094	40.95
9.5	.3740	92.0	3  5/8	127.0	5	690095	40.10
9.6	.3780	95.0	3  3/4	130.0	5  1/8	690096	41.70
9.7	.3819	95.0	3  3/4	130.0	5  1/8	690097	41.70
9.8	.3858	95.0	3  3/4	130.0	5  1/8	690098	41.70
9.9	.3898	95.0	3  3/4	130.0	5  1/8	690099	41.70
10.0	.3937	95.0	3  3/4	130.0	5  1/8	690100	41.70
10.1	.3976	98.0	3  7/8	133.0	5  1/4	690101	49.50
10.2	.4016	98.0	3  7/8	133.0	5  1/4	690102	49.50
10.3	.4055	98.0	3  7/8	133.0	5  1/4	690103	49.50
10.4	.4094	98.0	3  7/8	133.0	5  1/4	690104	49.55
10.5	.4134	98.0	3  7/8	133.0	5  1/4	690105	48.00
10.6	.4173	100.0	3 15/16	137.0	5  3/8	690106	54.45
10.7	.4213	100.0	3 15/16	137.0	5  3/8	690107	54.45
10.8	.4252	103.0	4  1/16	140.0	5  1/2	690108	54.45
10.9	.4291	103.0	4  1/16	140.0	5  1/2	690109	54.45
11.0	.4331	103.0	4  1/16	140.0	5  1/2	690110	51.90
11.1	.4370	103.0	4  1/16	140.0	5  1/2	690111	60.55
11.2	.4409	106.0	4  3/16	143.0	5  5/8	690112	60.60
11.3	.4449	106.0	4  3/16	143.0	5  5/8	690113	60.60
11.4	.4488	106.0	4  3/16	143.0	5  5/8	690114	60.55
11.5	.4528	106.0	4  3/16	143.0	5  5/8	690115	58.10
11.6	.4567	110.0	4  5/16	146.0	5  3/4	690116	65.75
11.7	.4606	110.0	4  5/16	146.0	5  3/4	690117	65.75
11.8	.4646	110.0	4  5/16	146.0	5  3/4	690118	65.75
11.9	.4685	110.0	4  5/16	146.0	5  3/4	690119	65.75
12.0	.4724	111.0	4  3/8	149.0	5  7/8	690120	63.05
12.5	.4921	114.0	4  1/2	152.0	6	690125	65.45
13.0	.5118	114.0	4  1/2	152.0	6	690130	78.00
13.5	.5315	122.0	4 13/16	168.0	6  5/8	690135	100.80
14.0	.5512	122.0	4 13/16	168.0	6  5/8	690140	106.95
14.5	.5709	122.0	4 13/16	168.0	6  5/8	690145	114.70
15.0	.5906	132.0	5  3/16	181.0	7  1/8	690150	114.70
15.5	.6102	132.0	5  3/16	181.0	7  1/8	690155	116.25
16.0	.6299	132.0	5  3/16	181.0	7  1/8	690160	118.30
16.5	.6496	132.0	5  3/16	181.0	7  1/8	690165	118.30
17.0	.6693	143.0	5  5/8	194.0	7  5/8	690170	122.80
17.5	.6890	143.0	5  5/8	194.0	7  5/8	690175	122.80
18.0	.7087	143.0	5  5/8	194.0	7  5/8	690180	124.15
18.5	.7283	143.0	5  5/8	194.0	7  5/8	690185	124.95
19.0	.7480	148.0	5 13/16	203.0	8	690190	126.60

The specifications of the Jobbers Length Drills listed above are only the dimensions that are critical to the application. Please choose the Drills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Jobbers Length Drills needs.

Hannibal Carbide Tool, Inc.

Industrial Supply Association

Value Added Partner