Fractional


Type 300 Fractional - Two Straight Flutes
Carbide Tipped
  • Two large flutes for easy chip removal
  • Use when machine horsepower is too low for high chip capacity end mills
  • Radial edged for longer tool life
  • Geometry and carbide grade, O.D. relief and end clearance appropriate for material being machined
  • Flute long carbide tips brazed to tough hardened alloy steel body
  • Straight shanks have standard Weldon drive flats
  • Non-center cutting end mills have the ends cleared to depth of carbide
 		  Modifications: (Prompt delivery)
  • Modified tool diameter
  • Metric tool diameter
  • Cutting diameter reduced for step or pilot
  • Corner chamfer or corner radius
  • Shortened shank or reduced shank diameter
  • Additional shank drive flat(s)
  • Coolant outlets
  • Stocked coated tools priced below
  • Coatings available:
    •  TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 

Notes
  When ordering stocked coated tools, specify TiN, TiCN or TiAIN after EDP No.
Below is a list of standard Straight Flutes End Mills offered by Hannibal Carbide Tool. If you do not see the Straight Flutes End Mills you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Straight Flutes End Mills. For technical assistance with your End Mills please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Dimensions Type 300
EDP NO.		 Price
Shank Diameter No. of Flutes Length
Frac. Dec. Carbide Overall
   1/4   .2500    3/8  2    1/2  2  1/2  30008 $73.85
   5/16  .3125    3/8  2    5/8  2  1/2  30010 76.95
   3/8   .3750    3/8  2    5/8  2  1/2  30012 82.15
   7/16  .4375    3/8  2 1         2 11/16 30014 82.15
   1/2   .5000    1/2  2 1         3  1/4  30016 84.00
   9/16  .5625    1/2  2 1         3  3/8  30018 93.20
   5/8   .6250    1/2  2 1         3  3/8  30020 93.20
   3/4   .7500    5/8  2 1         3  5/8  30024 104.60
   7/8   .8750    5/8  2 1  1/4  4         30028 123.60
1         1.0000    7/8  2 1  1/4  4         30032 136.55
1  1/8  1.1250 1         2 1  1/4  4  1/4  30036 139.90
1  1/4  1.2500 1         2 1  1/4  4  1/4  30040 156.00
1  1/2  1.5000 1  1/4  2 1  1/2  4  1/2  30048 200.95
1  3/4  1.7500 1  1/4  2 1  1/2  4  1/2  30056 225.35
2         2.0000 1  1/4  2 1  1/2  4  1/2  30064 269.10
The specifications of the Straight Flutes End Mills listed above are only the dimensions that are critical to the application. Please choose the End Mills that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Straight Flutes End Mills needs.