Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  414 
 40  NON-FERROUS - SHORT CHIPS  414 / 424 
 60  CAST IRONS  424 
 80  LOW STRENGTH STEELS  434 / 424 
 100  MEDIUM STRENGTH STEELS  434 
 120  HIGH STRENGTH STEELS  434 
 140  HIGH TEMPERATURE ALLOYS  434

Type 414 Fractional - Center Fed For Blind Holes - For Non-Ferrous Materials
Carbide Tipped
  • Center coolant outlet
  • Polished flutes; flute long carbide on .2841" tool diameter and larger
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • Material specific reamer shanks are ground to next smallest shank diameter listed in NAS 897 if tool diameter is within .005" of shank diameter
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Metric tool diameter
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shortened shank or reduced shank diameter
  • Flat(s) or tang on shank
  • Coatings available:
     TITANIUM NITRIDE - TiN 
     TITANIUM CARBONITRIDE - TiCN 
     ZIRCONIUM NITRIDE - ZrN 
     AL TITANIUM NITRIDE - AITiN 
Use:
  • Center coolant outlet for reaming blind holes as chips are flushed back towards the shank
  • Improves hole finish and permits higher feeds & speeds with longer tool life
Below is a list of standard Coolant Fed Reamers offered by Hannibal Carbide Tool. If you do not see the Coolant Fed Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your Coolant Fed Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 414
EDP NO.		 Fractional
Price		 Dimensions Finished To Modified Tool Diameter
Max. Shank Diam. No. of Flutes Length Modified Diameter Range Price Each - Based on Quantity Ordered
Frac. Dec. Flute Carbide Overall Low High 1 2 3 4 5-7 8-14*
   3/16  .1875 41406 $119.65  .1805 4 1  1/4     1/2  5          .1770  .2040 $157.10 $138.30 $132.00 $129.05 $125.85 $123.35
  13/64  .2031 4142031 119.65  .1805 4 1  1/4     1/2  5         — — — — — — — —
   7/32  .2188 41407 119.65  .2075 4 1  1/4     1/2  5          .2041  .2210 157.10 138.30 132.00 129.05 125.85 123.35
  15/64  .2344 4142344 119.65  .2265 4 1  1/2     1/2  6          .2211  .2380 157.10 138.30 132.00 129.05 125.85 123.35
   1/4   .2500 41408 119.65  .2405 4 1  1/2     1/2  6          .2381  .2530 157.10 138.30 132.00 129.05 125.85 123.35
  17/64  .2656 4142656 127.00  .2485 4 1  1/2     1/2  6         — — — — — — — —
   9/32  .2813 41409 127.00  .2485 4 1  1/2     1/2  6          .2531  .2840 164.40 145.65 139.35 136.35 133.15 130.70
  19/64  .2969 4142969 134.15  .2792 4 1  1/2  1  1/2  6         — — — — — — — —
   5/16  .3125 41410 134.15  .2792 4 1  1/2  1  1/2  6          .2841  .3150 171.55 152.75 146.50 143.40 140.30 137.75
  21/64  .3281 4143281 135.15  .2792 4 1  1/2  1  1/2  6         — — — — — — — —
  11/32  .3438 41411 135.15  .2792 4 1  1/2  1  1/2  6          .3151  .3470 172.55 153.80 147.60 144.50 141.35 138.90
  23/64  .3594 4143594 136.55  .3105 4 1  3/4  1  3/4  7         — — — — — — — —
   3/8   .3750 41412 136.55  .3105 4 1  3/4  1  3/4  7          .3471  .3780 173.95 155.20 148.95 145.90 142.70 140.25
  25/64  .3906 4143906 137.00  .3105 4 1  3/4  1  3/4  7         — — — — — — — —
  13/32  .4063 41413 137.00  .3105 4 1  3/4  1  3/4  7          .3781  .4090 174.35 155.70 149.40 146.40 143.20 140.60
  27/64  .4219 4144219 138.35  .3730 6 1  3/4  1  3/4  7         — — — — — — — —
   7/16  .4375 41414 138.35  .3730 6 1  3/4  1  3/4  7          .4091  .4410 175.75 157.10 150.70 147.80 144.50 142.05
  29/64  .4531 4144531 139.55  .3730 6 1  3/4  1  3/4  7         — — — — — — — —
  15/32  .4688 41415 139.55  .3730 6 1  3/4  1  3/4  7          .4411  .4720 177.00 158.25 151.95 149.00 145.75 143.25
  31/64  .4844 4144844 141.15  .4355 6 2         2         8         — — — — — — — —
   1/2   .5000 41416 141.15  .4355 6 2         2         8          .4721  .5030 178.60 159.90 153.65 150.60 147.45 144.85
  33/64  .5156 4145156 144.35  .4355 6 2         2         8         — — — — — — — —
  17/32  .5313 41417 144.35  .4355 6 2         2         8          .5031  .5340 181.65 162.95 156.70 153.75 150.55 147.95
   9/16  .5625 41418 146.40  .4355 6 2         2         8          .5341  .5660 183.80 165.00 158.75 155.85 152.60 150.05
  19/32  .5938 41419 149.45  .4355 6 2         2         8          .5661  .5970 186.85 168.10 161.85 158.90 155.70 153.15
   5/8   .6250 41420 152.30  .5615 6 2  1/4  2  1/4  9          .5971  .6280 189.70 170.90 164.70 161.60 158.50 155.95
  21/32  .6563 41421 168.60  .5615 6 2  1/4  2  1/4  9          .6281  .6590 205.95 187.20 180.90 178.05 174.75 172.25
  11/16  .6875 41422 172.00  .5615 6 2  1/4  2  1/4  9          .6591  .6910 209.35 190.75 184.35 181.45 178.20 175.65
  23/32  .7188 41423 179.40  .5615 6 2  1/4  2  1/4  9          .6911  .7220 216.75 198.15 191.85 188.85 185.65 183.05
   3/4   .7500 41424 179.40  .6245 6 2  1/2  2  1/2  9  1/2   .7221  .7530 216.75 198.15 191.85 188.85 185.65 183.05
  25/32  .7813 41425 184.75  .6245 6 2  1/2  2  1/2  9  1/2   .7531  .7840 222.10 203.35 197.15 194.20 190.90 188.35
  13/16  .8125 41426 184.75  .6245 6 2  1/2  2  1/2  9  1/2   .7841  .8160 222.10 203.35 197.15 194.20 190.90 188.35
  27/32  .8438 41427 191.05  .6245 6 2  1/2  2  1/2  9  1/2   .8161  .8470 228.40 209.75 203.40 200.45 197.25 194.65
   7/8   .8750 41428 198.30  .7495 6 2  5/8  2  5/8  10          .8471  .8780 237.10 217.60 211.10 208.00 204.70 202.05
  29/32  .9063 41429 220.15  .7495 6 2  5/8  2  5/8  10          .8781  .9090 258.95 239.50 232.95 229.95 226.55 224.00
  15/16  .9375 41430 220.15  .7495 8 2  5/8  2  5/8  10          .9091  .9410 258.95 239.50 232.95 229.95 226.55 224.00
  31/32  .9688 41431 221.00  .7495 8 2  5/8  2  5/8  10          .9411  .9720 259.80 240.40 233.95 230.80 227.40 224.85
1         1.0000 41432 221.00  .8745 8 2  3/4  2  3/4  10  1/2   .9721 1.0030 259.80 240.40 233.95 230.80 227.40 224.85
1  1/16 1.0625 41434 227.30  .8745 8 2  3/4  2  3/4  10  1/2  1.0031 1.0660 266.10 246.65 240.15 237.10 233.65 231.10
1  1/8  1.1250 41436 235.20  .8745 8 2  7/8  2  7/8  11         1.0661 1.1280 273.95 254.55 247.95 244.90 241.55 238.90
1  3/16 1.1875 41438 251.90  .9995 8 2  7/8  2  7/8  11         1.1281 1.1905 290.75 271.25 264.65 261.70 258.35 255.75
1  1/4  1.2500 41440 255.15  .9995 8 3         3         11  1/2  1.1906 1.2530 294.05 274.55 268.05 265.00 261.70 259.10
1  5/16 1.3125 41442 262.50  .9995 8 3         3         11  1/2  1.2531 1.3155 301.35 281.85 275.40 272.20 268.95 266.35
1  3/8  1.3750 41444 273.15  .9995 8 3  1/4  3  1/4  12         1.3156 1.3780 311.95 292.45 286.05 282.90 279.60 276.90
1  7/16 1.4375 41446 281.65  .9995 8 3  1/4  3  1/4  12         1.3781 1.4405 320.55 301.05 294.60 291.50 288.15 285.55
1  1/2  1.5000 41448 291.10 1.2495 8 3  1/2  3  1/2  12  1/2  1.4406 1.5030 329.95 310.50 304.00 300.90 297.60 294.95
1  9/16 1.5625 41450 309.95 1.2495 8 3  1/2  3  1/2  12  1/2  1.5031 1.5660 346.95 328.45 322.25 319.30 316.05 313.65
1  5/8  1.6250 41452 339.35 1.2495 8 3  1/2  3  1/2  13         1.5661 1.6280 376.25 357.80 351.65 348.60 345.45 343.00
1 11/16 1.6875 41454 346.50 1.2495 8 3  1/2  3  1/2  13         1.6281 1.6910 383.50 365.05 358.85 355.85 352.65 350.20
1  3/4  1.7500 41456 379.50 1.2495 10 3  1/2  3  1/2  13  1/2  1.6911 1.7530 416.50 398.00 391.80 388.85 385.60 383.20
1 13/16 1.8125 41458 395.00 1.4995 10 3  1/2  3  1/2  13  1/2  1.7531 1.8160 432.00 413.50 407.30 404.35 401.10 398.70
1  7/8  1.8750 41460 417.00 1.4995 10 3  1/2  3  1/2  14         1.8161 1.8780 454.00 435.45 429.30 426.35 423.15 420.65
1 15/16 1.9375 41462 442.10 1.4995 10 3  1/2  3  1/2  14         1.8781 1.9410 479.10 460.60 454.40 451.45 448.25 445.75
2         2.0000 41464 459.10 1.4995 12 3  1/2  3  1/2  14         1.9411 2.0030 496.10 477.65 471.40 468.45 465.25 462.80
* Quantities of 15 or more - price of fractional size in same size range

The specifications of the Coolant Fed Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your Coolant Fed Reamers needs.