Fractional | Metric


TOOL SELECTOR
CHIP
CLASS
MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  467 / 461 
 40  NON-FERROUS - SHORT CHIPS  467 / 461 
 60  CAST IRONS  467 / 462 
 80  LOW STRENGTH STEELS  467 / 463 
 100  MEDIUM STRENGTH STEELS  467 / 463 
 120  HIGH STRENGTH STEELS  467 / 463 
 140  HIGH TEMPERATURE ALLOYS  463

Type 467 Fractional - Straight Flute Long Carbide - Taper Shank
Carbide Tipped
  • Expansion screw permits expansion of tool diameter for regrinding after wear without reinserting carbide
  • Straight polished flutes with flute long carbide; Taper shank
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body, except expansion reamers which are not hardened
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • “Taper Shank No.” refers to American Standard taper series (formerly Morse taper series) per ASME/ANSI B5.10
  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shank whistle notch for set screw
  • Smaller taper shank
  • Expansion reamers can not be coated
Use:
  • Expansion reamers are recommended for reaming abrasive materials. As the diameter wears down, the reamers can be expanded many times by tightening the end expansion screw and regrinding to its original size. Expansion reamers should not be considered as adjustable for use in producing holes of different sizes.
Below is a list of standard General Purpose Chucking Reamers offered by Hannibal Carbide Tool. If you do not see the General Purpose Chucking Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your General Purpose Chucking Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 467
EDP NO.
Fractional
Price
Dimensions Finished To Modified Tool Diameter
Taper Shank No. No. of Flutes Length Modified Diameter Range Price Each - Based on Quantity Ordered
Frac. Dec. Flute Carbide Overall Low High 1 2 3 4 5-7 8-14*
   5/16  .3125 46710 $89.40 1 4                          .2841  .3150 $130.75 $110.00 $103.15 $99.75 $96.35 $93.45
  11/32  .3438 46711 89.40 1 4                          .3151  .3470 130.75 110.00 103.15 99.75 96.35 93.45
   3/  .3750 46712 83.85 1 4                          .3471  .3780 122.60 103.15 96.65 93.60 90.30 87.70
  13/32  .4063 46713 86.45 1 4                          .3781  .4090 125.10 105.70 99.20 96.10 92.75 90.20
   7/16  .4375 46714 86.45 1 4                          .4091  .4410 125.10 105.70 99.20 96.10 92.75 90.20
  15/32  .4688 46715 90.65 1 4                          .4411  .4720 129.40 110.00 103.45 100.40 97.05 94.45
   1/  .5000 46716 90.65 1 6                          .4721  .5030 129.40 110.00 103.45 100.40 97.05 94.45
  17/32  .5313 46717 93.40 1 6                          .5031  .5340 132.15 112.70 106.25 103.15 99.75 97.15
   9/16  .5625 46718 93.40 1 6  1/  1/          .5341  .5660 132.15 112.70 106.25 103.15 99.75 97.15
  19/32  .5938 46719 97.15 1 6  1/  1/          .5661  .5970 135.85 116.55 110.10 106.95 103.75 101.05
   5/  .6250 46720 97.15 2 6  1/  1/          .5971  .6280 135.85 116.55 110.10 106.95 103.75 101.05
  21/32  .6563 46721 109.40 2 6  1/  1/          .6281  .6590 148.10 128.65 122.15 119.10 115.80 113.25
  11/16  .6875 46722 109.40 2 6  1/  1/          .6591  .6910 148.10 128.65 122.15 119.10 115.80 113.25
  23/32  .7188 46723 109.60 2 6  1/  1/          .6911  .7220 148.40 129.05 122.60 119.50 116.05 113.50
   3/  .7500 46724 109.60 2 6  3/  3/  1/  .7221  .7530 148.40 129.05 122.60 119.50 116.05 113.50
  25/32  .7813 46725 117.75 2 6  3/  3/  1/  .7531  .7840 156.50 137.05 130.70 127.60 124.20 121.60
  13/16  .8125 46726 117.75 2 6  3/  3/  1/  .7841  .8160 156.50 137.05 130.70 127.60 124.20 121.60
  27/32  .8438 46727 122.75 2 6  3/  3/  1/  .8161  .8470 161.40 142.00 135.55 132.40 129.10 126.45
   7/  .8750 46728 127.45 2 6  1/  1/ 10          .8471  .8780 167.45 147.45 140.65 137.50 133.95 131.20
  29/32  .9063 46729 134.70 2 6  1/  1/ 10          .8781  .9090 174.85 154.75 147.95 144.75 141.30 138.65
  15/16  .9375 46730 134.70 3 8  1/  1/ 10          .9091  .9410 174.85 154.75 147.95 144.75 141.30 138.65
  31/32  .9688 46731 139.60 3 8  1/  1/ 10          .9411  .9720 179.65 159.50 152.75 149.60 146.25 143.40
        1.0000 46732 139.60 3 8  5/  5/ 10  1/  .9721 1.0030 179.65 159.50 152.75 149.60 146.25 143.40
 1/32 1.0313 46733 152.65 3 8  5/  5/ 10  1/
 1/16 1.0625 46734 152.65 3 8  5/  5/ 10  1/ 1.0031 1.0660 193.00 172.80 166.05 162.85 159.40 156.65
 3/32 1.0938 46735 152.65 3 8  3/  3/ 11        
 1/ 1.1250 46736 152.65 3 8  3/  3/ 11         1.0661 1.1280 193.00 172.80 166.05 162.85 159.40 156.65
 3/16 1.1875 46738 171.75 3 8  3/  3/ 11         1.1281 1.1905 211.85 191.75 185.05 181.85 178.45 175.70
 1/ 1.2500 46740 174.10 4 8  7/  7/ 11  1/ 1.1906 1.2530 214.20 194.15 187.45 184.25 180.70 178.05
 5/16 1.3125 46742 190.30 4 8  7/  7/ 11  1/ 1.2531 1.3155 230.40 210.30 203.55 200.40 197.05 194.20
 3/ 1.3750 46744 208.50 4 8                 12         1.3156 1.3780 248.50 228.45 221.80 218.55 215.10 212.35
 7/16 1.4375 46746 234.00 4 8                 12         1.3781 1.4405 276.80 255.35 248.20 244.75 241.05 238.20
 1/ 1.5000 46748 242.30 4 8  1/  1/ 12  1/ 1.4406 1.5030 285.15 263.65 256.40 253.10 249.35 246.45
 9/16 1.5625 46750 332.90 4 8  1/  1/ 12  1/ 1.5031 1.5660 375.80 354.30 347.15 343.75 340.00 337.10
 5/ 1.6250 46752 332.90 4 8  1/  1/ 13         1.5661 1.6280 375.80 354.30 347.15 343.75 340.00 337.10
11/16 1.6875 46754 368.70 4 8  1/  1/ 13         1.6281 1.6910 411.60 390.15 382.90 379.45 375.85 372.90
 3/ 1.7500 46756 368.70 4 10  3/  3/ 13  1/ 1.6911 1.7530 411.60 390.15 382.90 379.45 375.85 372.90
13/16 1.8125 46758 436.55 4 10  3/  3/ 13  1/ 1.7531 1.8160 479.40 458.05 450.85 447.40 443.65 440.80
 7/ 1.8750 46760 436.55 4 10  1/  1/ 14         1.8161 1.8780 479.40 458.05 450.85 447.40 443.65 440.80
15/16 1.9375 46762 477.15 4 10  1/  1/ 14         1.8781 1.9410 519.85 498.40 491.20 487.85 484.10 481.35
        2.0000 46764 477.15 4 12  1/  1/ 14         1.9411 2.0030 519.85 498.40 491.20 487.85 484.10 481.35
 1/ 2.1250 46768 714.30 5 12  3/  3/ 14  1/ 2.0031 2.1280 757.10 735.70 728.45 725.05 721.45 718.45
 1/ 2.2500 46772 767.05 5 12  3/  3/ 14  1/ 2.1281 2.2530 809.95 788.45 781.35 777.80 774.20 771.35
 3/ 2.3750 46776 793.75 5 12                 15         2.2531 2.3780 836.50 815.20 807.90 804.60 800.85 798.00
 1/ 2.5000 46780 793.75 5 12                 15         2.3781 2.5030 836.50 815.20 807.90 804.60 800.85 798.00
* Quantities of 15 or more - price of fractional size in same size range