Fractional | Metric


TOOL SELECTOR
CHIP
CLASS		MATERIAL MACHINEDTOOL TYPE
 20  NON-FERROUS - LONG CHIPS  467 / 461 
 40  NON-FERROUS - SHORT CHIPS  467 / 461 
 60  CAST IRONS  467 / 462 
 80  LOW STRENGTH STEELS  467 / 463 
 100  MEDIUM STRENGTH STEELS  467 / 463 
 120  HIGH STRENGTH STEELS  467 / 463 
 140  HIGH TEMPERATURE ALLOYS  463

Type 467 Metric - Straight Flute Long Carbide - Taper Shank
Carbide Tipped
  • Expansion screw permits expansion of tool diameter for regrinding after wear without reinserting carbide
  • Straight polished flutes with flute long carbide; Taper shank
  • Geometry and carbide grade appropriate for material being machined
  • Carbide tips brazed to tough hardened alloy steel body, except expansion reamers which are not hardened
  • Polished flutes for easy chip flow
  • Precision ground cutting edges
  • “Taper Shank No.” refers to American Standard taper series (formerly Morse taper series) per ASME/ANSI B5.10
 		  Modifications: (Prompt delivery)
  • Modified tool diameter - priced below
  • Closer tool diameter tolerance
  • Cutting diameter reduced for step or pilot
  • End chamfer other than 45º
  • End cutting or corner radius
  • Increased / decreased circular margin
  • Increased / decreased tool diameter back taper
  • Shank whistle notch for set screw
  • Smaller taper shank
  • Expansion reamers can not be coated
Use:
  • Expansion reamers are recommended for reaming abrasive materials. As the diameter wears down, the reamers can be expanded many times by tightening the end expansion screw and regrinding to its original size. Expansion reamers should not be considered as adjustable for use in producing holes of different sizes.

Notes
  Modified tool diameters are available up to 63mm - contact us for price
Below is a list of standard General Purpose Chucking Reamers offered by Hannibal Carbide Tool. If you do not see the General Purpose Chucking Reamers you are looking for you can click here for our SPECIAL TOOL QUOTE REQUEST FORM and fax (573-221-1140) or email your request to Hannibal. Within 24 hours we will let you know how we can supply your General Purpose Chucking Reamers. For technical assistance with your Reamers please click here to fill out and submit our HANNIBAL TECHNICAL SUPPORT QUESTIONNAIRE.
Tool Diameter Type 467
EDP NO.		 Metric
Price		 Dimensions Finished To Modified Tool Diameter
Taper Shank No. No. of Flutes Length Modified Diameter Range (mm) Price Each - Based on Quantity Ordered
mm Inch Flute Carbide Overall Low High 1 2 3 4 5-7 8-14 Over 14
7.5  .2953 467075 $103.15 1 4 1         1         6         7.2150 8.0010 $134.20 $113.55 $106.70 $103.30 $99.75 $96.95 $92.90
8.0  .3150 467080 103.15 1 4 1         1         6         — — — — — — — — —
8.5  .3346 467085 103.15 1 4 1         1         6         8.0020 8.8140 134.20 113.55 106.70 103.30 99.75 96.95 92.90
9.0  .3543 467090 96.65 1 4 1         1         7         8.8150 9.6010 125.75 106.45 100.00 96.80 93.60 90.90 87.10
9.5  .3740 467095 96.65 1 4 1         1         7         — — — — — — — — —
10.0  .3937 467100 99.20 1 4 1         1         7         9.6020 10.3890 128.30 109.10 102.55 99.35 96.10 93.40 89.65
10.5  .4134 467105 99.20 1 4 1         1         7         10.3900 11.2010 128.30 109.10 102.55 99.35 96.10 93.40 89.65
11.0  .4331 467110 99.20 1 4 1         1         7         — — — — — — — — —
11.5  .4528 467115 103.45 1 4 1         1         7         11.2020 11.9890 132.60 113.30 106.85 103.75 100.40 97.75 93.95
12.0  .4724 467120 103.45 1 6 1         1         8         11.9900 12.7760 132.60 113.30 106.85 103.75 100.40 97.75 93.95
12.5  .4921 467125 103.45 1 6 1         1         8         — — — — — — — — —
13.0  .5118 467130 106.25 1 6 1         1         8         12.7770 13.5640 135.45 116.00 109.50 106.40 103.15 100.55 96.70
13.5  .5315 467135 106.25 1 6 1         1         8         — — — — — — — — —
14.0  .5512 467140 106.25 1 6 1  1/8  1  1/8  8         13.5650 14.3760 135.45 116.00 109.50 106.40 103.15 100.55 96.70
14.5  .5709 467145 110.10 1 6 1  1/8  1  1/8  8         14.3770 15.1640 139.15 119.75 113.40 110.25 106.95 104.20 100.60
15.0  .5906 467150 110.10 1 6 1  1/8  1  1/8  8         — — — — — — — — —
15.5  .6102 467155 110.10 2 6 1  1/4  1  1/4  9         15.1650 15.9510 139.15 119.75 113.40 110.25 106.95 104.20 100.60
16.0  .6299 467160 122.15 2 6 1  1/4  1  1/4  9         15.9520 16.7390 151.35 132.00 125.50 122.25 119.10 116.50 112.70
16.5  .6496 467165 122.15 2 6 1  1/4  1  1/4  9         — — — — — — — — —
17.0  .6693 467170 122.15 2 6 1  1/4  1  1/4  9         16.7400 17.5510 151.35 132.00 125.50 122.25 119.10 116.50 112.70
17.5  .6890 467175 122.15 2 6 1  1/4  1  1/4  9         — — — — — — — — —
18.0  .7087 467180 122.60 2 6 1  1/4  1  1/4  9         17.5520 18.3390 151.70 132.35 125.95 122.75 119.50 116.75 113.10
18.5  .7283 467185 122.60 2 6 1  3/8  1  3/8  9  1/2  18.3400 19.1260 151.70 132.35 125.95 122.75 119.50 116.75 113.10
19.0  .7480 467190 122.60 2 6 1  3/8  1  3/8  9  1/2  — — — — — — — — —
19.5  .7677 467195 130.70 2 6 1  3/8  1  3/8  9  1/2  19.1270 19.9140 159.75 140.50 133.95 130.80 127.60 124.85 121.10
20.0  .7874 467200 130.70 2 6 1  3/8  1  3/8  9  1/2  19.9150 20.7260 159.75 140.50 133.95 130.80 127.60 124.85 121.10
20.5  .8071 467205 130.70 2 6 1  3/8  1  3/8  9  1/2  — — — — — — — — —
21.0  .8268 467210 135.55 2 6 1  3/8  1  3/8  9  1/2  20.7270 21.5140 164.60 145.35 138.90 135.65 132.40 129.65 126.10
21.5  .8465 467215 135.55 2 6 1  3/8  1  3/8  9  1/2  — — — — — — — — —
22.0  .8661 467220 135.55 2 6 1  1/2  1  1/2  10         21.5150 22.3010 164.60 145.35 138.90 135.65 132.40 129.65 126.10
22.5  .8858 467225 147.95 2 6 1  1/2  1  1/2  10         22.3020 23.0890 178.20 158.10 151.45 148.10 144.75 142.00 138.15
23.0  .9055 467230 147.95 2 6 1  1/2  1  1/2  10         — — — — — — — — —
23.5  .9252 467235 147.95 3 8 1  1/2  1  1/2  10         23.0900 23.9010 178.20 158.10 151.45 148.10 144.75 142.00 138.15
24.0  .9449 467240 152.75 3 8 1  1/2  1  1/2  10         23.9020 24.6890 183.05 163.10 156.35 153.10 149.60 146.85 143.05
24.5  .9646 467245 152.75 3 8 1  1/2  1  1/2  10         — — — — — — — — —
25.0  .9843 467250 152.75 3 8 1  5/8  1  5/8  10  1/2  24.6900 25.4760 183.05 163.10 156.35 153.10 149.60 146.85 143.05
25.5 1.0039 467255 166.05 3 8 1  5/8  1  5/8  10  1/2  25.4770 27.0760 196.30 176.20 169.45 166.20 162.85 160.15 156.20
26.0 1.0236 467260 166.05 3 8 1  5/8  1  5/8  10  1/2  — — — — — — — — —
27.0 1.0630 467270 166.05 3 8 1  5/8  1  5/8  10  1/2  — — — — — — — — —
28.0 1.1024 467280 166.05 3 8 1  3/4  1  3/4  11         27.0770 28.6510 196.30 176.20 169.45 166.20 162.85 160.15 156.20
29.0 1.1417 467290 185.05 3 8 1  3/4  1  3/4  11         28.6520 30.2390 215.25 195.25 188.50 185.20 181.85 179.05 175.10
30.0 1.1811 467300 185.05 3 8 1  3/4  1  3/4  11         — — — — — — — — —
31.0 1.2205 467310 187.45 4 8 1  7/8  1  7/8  11  1/2  30.2400 31.8260 217.65 197.60 190.85 187.55 184.25 181.40 177.50
32.0 1.2598 467320 203.55 4 8 1  7/8  1  7/8  11  1/2  31.8270 33.4140 233.75 213.70 207.10 203.75 200.40 197.60 193.75
33.0 1.2992 467330 203.55 4 8 1  7/8  1  7/8  11  1/2  — — — — — — — — —
34.0 1.3386 467340 221.80 4 8 2         2         12         33.4150 35.0010 251.90 232.00 225.20 221.95 218.55 215.75 211.85
35.0 1.3780 467350 221.80 4 8 2         2         12         — — — — — — — — —
36.0 1.4173 467360 248.20 4 8 2         2         12         35.0020 36.5890 280.35 259.00 251.80 248.35 244.75 241.70 237.70
37.0 1.4567 467370 256.40 4 8 2  1/8  2  1/8  12  1/2  36.5900 38.1760 288.75 267.30 260.25 256.70 253.10 250.15 245.95
38.0 1.4961 467380 256.40 4 8 2  1/8  2  1/8  12  1/2  — — — — — — — — —
39.0 1.5354 467390 347.15 4 8 2  1/8  2  1/8  12  1/2  38.1770 39.7760 379.30 357.95 350.90 347.25 343.75 340.75 336.65
40.0 1.5748 467400 347.15 4 8 2  1/4  2  1/4  13         39.7770 41.3510 379.30 357.95 350.90 347.25 343.75 340.75 336.65
41.0 1.6142 467410 347.15 4 8 2  1/4  2  1/4  13         — — — — — — — — —
42.0 1.6535 467420 382.90 4 8 2  1/4  2  1/4  13         41.3520 42.9510 415.15 393.80 386.65 383.20 379.45 376.60 372.35
43.0 1.6929 467430 382.90 4 10 2  3/8  2  3/8  13  1/2  42.9520 44.5260 415.15 393.80 386.65 383.20 379.45 376.60 372.35
44.0 1.7323 467440 382.90 4 10 2  3/8  2  3/8  13  1/2  — — — — — — — — —
The specifications of the General Purpose Chucking Reamers listed above are only the dimensions that are critical to the application. Please choose the Reamers that meet your specific needs.

Everyone at Hannibal would like to THANK YOU for the privilege of servicing your General Purpose Chucking Reamers needs.